NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Corn Electronics
Full tower case holds 13 HDD bays and 2 SSD slots with magnetic front panel and 360 mm liquid-cooling support
The Corn Electronics KM7B is a full-tower case built for storage-heavy builds such as NAS servers or local media libraries. It accepts Micro-ATX, ATX and E-ATX motherboards and provides thirteen hard-drive bays plus two SSD positions. A magnetic front panel simplifies access to the drive cages. No power supply is included.
Front mounts accept three 120 mm or 140 mm fans, the top takes three 120 mm or two 140 mm fans and the rear fits one 120 mm or 140 mm fan. Liquid-cooling support covers 360 mm and 280 mm radiators. The steel, aluminium and ABS construction helps dissipate heat during long file-transfer or parity-check sessions.
Thirteen 3.5-inch bays are the specification that determines suitability; systems needing fewer drives will leave capacity unused while larger arrays require external enclosures. GPU length is limited to 417 mm without the cages or 280 mm with them installed. CPU cooler height maxes out at 180 mm.
| Type | ATX Full Tower |
|---|---|
| Color | Black |
| Case Material | ABS / Aluminum / Steel |
| With Power Supply | No |
| Motherboard Compatibility | ATX |
| Side Panel | without Side Window |
The case supports up to seven fans — three 120 or 140 mm at the front, one at the rear and two or three on top — so sustained airflow depends on the fans you install rather than a fixed noise or heat figure.
You need an ATX-format power supply, a Micro-ATX, ATX or E-ATX motherboard, a CPU cooler no taller than 180 mm, and any graphics card up to 417 mm long if the drive bays are removed or 280 mm with them fitted.
A 360 mm radiator can be mounted in the front or top, but with the drive bays installed the maximum graphics-card length drops to 280 mm, so a longer legacy card would require removing the bays to keep the 417 mm clearance.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?