Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
3.5 inch SAS hard drive, silver metal casing

DELL

DELL 4TB SAS 7.2K 3.5" 529FG Internal Hard Drive

SKU CH-WT4H-Z8598

A 4 TB SAS desktop drive spinning at 7.2 K RPM in a 3.5 inch form factor

  • 4 TB capacity stores large datasets
  • SAS interface connects to enterprise controllers
  • 2 K spindle speed balances throughput and power
  • 5 inch form factor fits standard drive bays
  • New condition delivers full manufacturer reliability

Dell 4TB SAS 7.2K 3.5" Drive

This Dell 4TB internal hard drive uses a SAS interface and spins at 7.2K RPM in a 3.5 inch form factor. It is built for desktop systems that require high-capacity magnetic storage with a Serial Attached SCSI connection. The drive carries part number 529FG and was first listed by the manufacturer in 2020.

Suited for SAS storage arrays

This drive suits builders adding bulk capacity to a desktop or server that already supports SAS controllers. It is not for systems limited to SATA-only backplanes or laptops that cannot accept a 3.5 inch device. Buyers needing solid-state latency or a smaller 2.5 inch form factor should consider other options.

Single specification: SAS interface

The decisive specification is the SAS interface, which determines controller and backplane compatibility. Verify that your host bus adapter or RAID card presents a SAS port before purchasing. The 4TB capacity and 7.2K spindle speed are secondary to this connectivity requirement.

Privalumai

  • 4 TB capacity stores large datasets
  • SAS interface connects to enterprise controllers
  • 2 K spindle speed balances throughput and power
  • 5 inch form factor fits standard drive bays
  • New condition delivers full manufacturer reliability

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

What drive bay size does the 3.5" SAS drive require?

The drive fits a standard 3.5-inch internal bay and connects via a SAS interface.

How is the 529FG drive installed and what step is often missed?

Mount the drive in a 3.5-inch bay, attach the SAS data and power cables, then enable the SAS controller in BIOS so the drive appears.

When should the 4TB 7.2K SAS drive be replaced?

Replace the drive if SMART errors appear, unusual noise develops, or after the manufacturer's rated service life is exceeded.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.