暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
3.5 inch SAS hard drive, silver metal casing

DELL

DELL 4TB SAS 7.2K 3.5" 529FG Internal Hard Drive

SKU CH-WT4H-Z8598

A 4 TB SAS desktop drive spinning at 7.2 K RPM in a 3.5 inch form factor

  • 4 TB capacity stores large datasets
  • SAS interface connects to enterprise controllers
  • 2 K spindle speed balances throughput and power
  • 5 inch form factor fits standard drive bays
  • New condition delivers full manufacturer reliability

Dell 4TB SAS 7.2K 3.5" Drive

This Dell 4TB internal hard drive uses a SAS interface and spins at 7.2K RPM in a 3.5 inch form factor. It is built for desktop systems that require high-capacity magnetic storage with a Serial Attached SCSI connection. The drive carries part number 529FG and was first listed by the manufacturer in 2020.

Suited for SAS storage arrays

This drive suits builders adding bulk capacity to a desktop or server that already supports SAS controllers. It is not for systems limited to SATA-only backplanes or laptops that cannot accept a 3.5 inch device. Buyers needing solid-state latency or a smaller 2.5 inch form factor should consider other options.

Single specification: SAS interface

The decisive specification is the SAS interface, which determines controller and backplane compatibility. Verify that your host bus adapter or RAID card presents a SAS port before purchasing. The 4TB capacity and 7.2K spindle speed are secondary to this connectivity requirement.

特長

  • 4 TB capacity stores large datasets
  • SAS interface connects to enterprise controllers
  • 2 K spindle speed balances throughput and power
  • 5 inch form factor fits standard drive bays
  • New condition delivers full manufacturer reliability

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What drive bay size does the 3.5" SAS drive require?

The drive fits a standard 3.5-inch internal bay and connects via a SAS interface.

How is the 529FG drive installed and what step is often missed?

Mount the drive in a 3.5-inch bay, attach the SAS data and power cables, then enable the SAS controller in BIOS so the drive appears.

When should the 4TB 7.2K SAS drive be replaced?

Replace the drive if SMART errors appear, unusual noise develops, or after the manufacturer's rated service life is exceeded.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。