نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
3.5 inch SAS hard drive, silver metal casing

DELL

DELL 4TB SAS 7.2K 3.5" 529FG Internal Hard Drive

SKU CH-WT4H-Z8598

A 4 TB SAS desktop drive spinning at 7.2 K RPM in a 3.5 inch form factor

  • 4 TB capacity stores large datasets
  • SAS interface connects to enterprise controllers
  • 2 K spindle speed balances throughput and power
  • 5 inch form factor fits standard drive bays
  • New condition delivers full manufacturer reliability

Dell 4TB SAS 7.2K 3.5" Drive

This Dell 4TB internal hard drive uses a SAS interface and spins at 7.2K RPM in a 3.5 inch form factor. It is built for desktop systems that require high-capacity magnetic storage with a Serial Attached SCSI connection. The drive carries part number 529FG and was first listed by the manufacturer in 2020.

Suited for SAS storage arrays

This drive suits builders adding bulk capacity to a desktop or server that already supports SAS controllers. It is not for systems limited to SATA-only backplanes or laptops that cannot accept a 3.5 inch device. Buyers needing solid-state latency or a smaller 2.5 inch form factor should consider other options.

Single specification: SAS interface

The decisive specification is the SAS interface, which determines controller and backplane compatibility. Verify that your host bus adapter or RAID card presents a SAS port before purchasing. The 4TB capacity and 7.2K spindle speed are secondary to this connectivity requirement.

أبرز المميزات

  • 4 TB capacity stores large datasets
  • SAS interface connects to enterprise controllers
  • 2 K spindle speed balances throughput and power
  • 5 inch form factor fits standard drive bays
  • New condition delivers full manufacturer reliability

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

What drive bay size does the 3.5" SAS drive require?

The drive fits a standard 3.5-inch internal bay and connects via a SAS interface.

How is the 529FG drive installed and what step is often missed?

Mount the drive in a 3.5-inch bay, attach the SAS data and power cables, then enable the SAS controller in BIOS so the drive appears.

When should the 4TB 7.2K SAS drive be replaced?

Replace the drive if SMART errors appear, unusual noise develops, or after the manufacturer's rated service life is exceeded.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.