Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Dell N3000 uplink module, two 10GbE BASE-T ports, hot-swappable

DELL

DELL CK9KC N3000 2P 10GbE BASE-T Hot-Swappable Uplink Module

SKU CH-QET9-V0WN7 MPN CK9KC

Adds two 10GbE BASE-T ports to a Dell N3000 switch with hot-swappable installation

  • TypeRack
  • Two 10 GbE BASE-T ports boost uplink bandwidth
  • Hot-swappable design lets you replace the module without powering down the switch
  • Purpose-built for Dell N3000 series switches
  • New condition means full factory specification and reliability
  • Part number CK9KC ensures exact compatibility with CAT-12243 systems

Dell N3000 2-Port 10GbE Uplink Module

This hot-swappable module adds two 10GbE BASE-T ports to compatible Dell N3000 series switches. It is built for network administrators who need to expand uplink capacity without powering down the chassis. The CK9KC part number identifies the exact unit for inventory tracking and firmware alignment.

Network teams upgrading Dell N3000 switches

The module suits teams running Dell N3000 series hardware that require additional 10GbE copper uplinks for server or storage links. It is not for operators of other switch families, environments needing fibre SFP+ uplinks, or builds requiring more than two extra ports per slot.

Two 10GbE BASE-T ports in a hot-swappable form

The decisive specification is the pair of 10GbE BASE-T interfaces delivered in a single hot-swappable module. Confirm the switch model matches the Dell N3000 series CAT-12243 compatibility list before ordering.

Privalumai

  • Two 10 GbE BASE-T ports boost uplink bandwidth
  • Hot-swappable design lets you replace the module without powering down the switch
  • Purpose-built for Dell N3000 series switches
  • New condition means full factory specification and reliability
  • Part number CK9KC ensures exact compatibility with CAT-12243 systems

Specifikacijos

BrandDELL
ModelCK9KC
TypeRack

Klausimai apie šią prekę

How is the CK9KC uplink module installed in a Dell N3000 series switch?

Slide the module into an empty uplink bay until the latch clicks; the hot-swappable design means the switch stays powered on during installation.

What maintenance or replacement will the CK9KC module need over time?

No scheduled maintenance is required; replace the module only if a port fails or a firmware update cannot resolve a link error.

What throughput limit appears first when both 10GbE BASE-T ports run at full load?

Each port is capped at 10 Gb/s, so sustained traffic above that rate on either port will hit the port-speed ceiling first.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.