Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Dell N3000 uplink module, two 10GbE BASE-T ports, hot-swappable

DELL

DELL CK9KC N3000 2P 10GbE BASE-T Hot-Swappable Uplink Module

SKU CH-QET9-V0WN7 MPN CK9KC

Adds two 10GbE BASE-T ports to a Dell N3000 switch with hot-swappable installation

  • TypeRack
  • Two 10 GbE BASE-T ports boost uplink bandwidth
  • Hot-swappable design lets you replace the module without powering down the switch
  • Purpose-built for Dell N3000 series switches
  • New condition means full factory specification and reliability
  • Part number CK9KC ensures exact compatibility with CAT-12243 systems

Dell N3000 2-Port 10GbE Uplink Module

This hot-swappable module adds two 10GbE BASE-T ports to compatible Dell N3000 series switches. It is built for network administrators who need to expand uplink capacity without powering down the chassis. The CK9KC part number identifies the exact unit for inventory tracking and firmware alignment.

Network teams upgrading Dell N3000 switches

The module suits teams running Dell N3000 series hardware that require additional 10GbE copper uplinks for server or storage links. It is not for operators of other switch families, environments needing fibre SFP+ uplinks, or builds requiring more than two extra ports per slot.

Two 10GbE BASE-T ports in a hot-swappable form

The decisive specification is the pair of 10GbE BASE-T interfaces delivered in a single hot-swappable module. Confirm the switch model matches the Dell N3000 series CAT-12243 compatibility list before ordering.

Puncte forte

  • Two 10 GbE BASE-T ports boost uplink bandwidth
  • Hot-swappable design lets you replace the module without powering down the switch
  • Purpose-built for Dell N3000 series switches
  • New condition means full factory specification and reliability
  • Part number CK9KC ensures exact compatibility with CAT-12243 systems

Specificații

BrandDELL
ModelCK9KC
TypeRack

Întrebări despre acest articol

How is the CK9KC uplink module installed in a Dell N3000 series switch?

Slide the module into an empty uplink bay until the latch clicks; the hot-swappable design means the switch stays powered on during installation.

What maintenance or replacement will the CK9KC module need over time?

No scheduled maintenance is required; replace the module only if a port fails or a firmware update cannot resolve a link error.

What throughput limit appears first when both 10GbE BASE-T ports run at full load?

Each port is capped at 10 Gb/s, so sustained traffic above that rate on either port will hit the port-speed ceiling first.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.