Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Dell N3000 uplink module, two 10GbE BASE-T ports, hot-swappable

DELL

DELL CK9KC N3000 2P 10GbE BASE-T Hot-Swappable Uplink Module

SKU CH-QET9-V0WN7 MPN CK9KC

Adds two 10GbE BASE-T ports to a Dell N3000 switch with hot-swappable installation

  • TypeRack
  • Two 10 GbE BASE-T ports boost uplink bandwidth
  • Hot-swappable design lets you replace the module without powering down the switch
  • Purpose-built for Dell N3000 series switches
  • New condition means full factory specification and reliability
  • Part number CK9KC ensures exact compatibility with CAT-12243 systems

Dell N3000 2-Port 10GbE Uplink Module

This hot-swappable module adds two 10GbE BASE-T ports to compatible Dell N3000 series switches. It is built for network administrators who need to expand uplink capacity without powering down the chassis. The CK9KC part number identifies the exact unit for inventory tracking and firmware alignment.

Network teams upgrading Dell N3000 switches

The module suits teams running Dell N3000 series hardware that require additional 10GbE copper uplinks for server or storage links. It is not for operators of other switch families, environments needing fibre SFP+ uplinks, or builds requiring more than two extra ports per slot.

Two 10GbE BASE-T ports in a hot-swappable form

The decisive specification is the pair of 10GbE BASE-T interfaces delivered in a single hot-swappable module. Confirm the switch model matches the Dell N3000 series CAT-12243 compatibility list before ordering.

Poudarki

  • Two 10 GbE BASE-T ports boost uplink bandwidth
  • Hot-swappable design lets you replace the module without powering down the switch
  • Purpose-built for Dell N3000 series switches
  • New condition means full factory specification and reliability
  • Part number CK9KC ensures exact compatibility with CAT-12243 systems

Specifikacije

BrandDELL
ModelCK9KC
TypeRack

Vprašanja o tem izdelku

How is the CK9KC uplink module installed in a Dell N3000 series switch?

Slide the module into an empty uplink bay until the latch clicks; the hot-swappable design means the switch stays powered on during installation.

What maintenance or replacement will the CK9KC module need over time?

No scheduled maintenance is required; replace the module only if a port fails or a firmware update cannot resolve a link error.

What throughput limit appears first when both 10GbE BASE-T ports run at full load?

Each port is capped at 10 Gb/s, so sustained traffic above that rate on either port will hit the port-speed ceiling first.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.