DELL
DELL F0V7R 600GB 2.5" SAS 10K 12Gb/s internal hard drive
A 600 GB 2.5" SAS hard drive spinning at 10000 RPM with a 12 Gb/s transfer rate and hot-swap tray
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity600GB
- RPM10000 RPM
- Average Latency6Gb/s
- Form Factor2.5"
- 600 GB capacity stores large datasets
- 10 000 RPM spindle delivers fast data access
- SAS 12 Gb/s interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Dell F0V7R 600GB SAS 10K drive
This new Dell F0V7R is a 600GB 2.5 inch SAS hard drive spinning at 10000 RPM. It is built for servers and storage arrays that use hot-swap drive bays and a 12Gb/s SAS backplane. The bare-drive packaging means it arrives without a carrier tray.
Suits 12Gb/s SAS hot-swap environments
Administrators expanding Dell PowerEdge or compatible SAS storage will find the 600GB capacity and 10K speed match typical nearline workloads. Buyers needing larger capacities or solid-state latency should evaluate other drive classes because this unit is a mechanical 10K SAS HDD.
12Gb/s SAS interface decides compatibility
The drive connects through a SAS interface rated at 12Gb/s transfer rate. A system backplane and controller that support 12Gb/s SAS are required for the drive to operate at its specified speed.
Privalumai
- 600 GB capacity stores large datasets
- 10 000 RPM spindle delivers fast data access
- SAS 12 Gb/s interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Specifikacijos
| Brand | Dell |
|---|---|
| Model | F0V7R |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 600GB |
| RPM | 10000 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 2.5" |
Klausimai apie šią prekę
How do I install the 2.5" SAS drive in a hot-swap bay, and which step is often missed?
Slide the drive into the bay until the SAS connector seats firmly, then lock the carrier latch; the step most often missed is fully engaging the latch so the drive registers on the 12Gb/s backplane.
What maintenance or replacement will the 600GB 10000 RPM drive need over time?
Mechanical wear on the spindle and actuator means the drive itself will eventually require replacement; no user-serviceable parts exist inside the sealed enclosure.
What limit appears first when the 10K SAS drive runs sustained workloads?
The 12Gb/s SAS interface bandwidth and the 10000 RPM mechanical latency become the bottlenecks before the 600GB capacity fills.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.



