DELL
DELL F0V7R 600GB 2.5" SAS 10K 12Gb/s internal hard drive
A 600 GB 2.5" SAS hard drive spinning at 10000 RPM with a 12 Gb/s transfer rate and hot-swap tray
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity600GB
- RPM10000 RPM
- Average Latency6Gb/s
- Form Factor2.5"
- 600 GB capacity stores large datasets
- 10 000 RPM spindle delivers fast data access
- SAS 12 Gb/s interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Dell F0V7R 600GB SAS 10K drive
This new Dell F0V7R is a 600GB 2.5 inch SAS hard drive spinning at 10000 RPM. It is built for servers and storage arrays that use hot-swap drive bays and a 12Gb/s SAS backplane. The bare-drive packaging means it arrives without a carrier tray.
Suits 12Gb/s SAS hot-swap environments
Administrators expanding Dell PowerEdge or compatible SAS storage will find the 600GB capacity and 10K speed match typical nearline workloads. Buyers needing larger capacities or solid-state latency should evaluate other drive classes because this unit is a mechanical 10K SAS HDD.
12Gb/s SAS interface decides compatibility
The drive connects through a SAS interface rated at 12Gb/s transfer rate. A system backplane and controller that support 12Gb/s SAS are required for the drive to operate at its specified speed.
Fordele
- 600 GB capacity stores large datasets
- 10 000 RPM spindle delivers fast data access
- SAS 12 Gb/s interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Specifikationer
| Brand | Dell |
|---|---|
| Model | F0V7R |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 600GB |
| RPM | 10000 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 2.5" |
Spørgsmål om denne vare
How do I install the 2.5" SAS drive in a hot-swap bay, and which step is often missed?
Slide the drive into the bay until the SAS connector seats firmly, then lock the carrier latch; the step most often missed is fully engaging the latch so the drive registers on the 12Gb/s backplane.
What maintenance or replacement will the 600GB 10000 RPM drive need over time?
Mechanical wear on the spindle and actuator means the drive itself will eventually require replacement; no user-serviceable parts exist inside the sealed enclosure.
What limit appears first when the 10K SAS drive runs sustained workloads?
The 12Gb/s SAS interface bandwidth and the 10000 RPM mechanical latency become the bottlenecks before the 600GB capacity fills.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



