我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Silver 2.5 inch SAS hard drive with hot-swap tray

DELL

DELL F0V7R 600GB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-113X-XPT2A

A 600 GB 2.5" SAS hard drive spinning at 10000 RPM with a 12 Gb/s transfer rate and hot-swap tray

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity600GB
  • RPM10000 RPM
  • Average Latency6Gb/s
  • Form Factor2.5"
  • 600 GB capacity stores large datasets
  • 10 000 RPM spindle delivers fast data access
  • SAS 12 Gb/s interface enables high-throughput transfers
  • 5 inch form factor fits dense server bays
  • Hot-swap tray allows drive replacement without downtime

Dell F0V7R 600GB SAS 10K drive

This new Dell F0V7R is a 600GB 2.5 inch SAS hard drive spinning at 10000 RPM. It is built for servers and storage arrays that use hot-swap drive bays and a 12Gb/s SAS backplane. The bare-drive packaging means it arrives without a carrier tray.

Suits 12Gb/s SAS hot-swap environments

Administrators expanding Dell PowerEdge or compatible SAS storage will find the 600GB capacity and 10K speed match typical nearline workloads. Buyers needing larger capacities or solid-state latency should evaluate other drive classes because this unit is a mechanical 10K SAS HDD.

12Gb/s SAS interface decides compatibility

The drive connects through a SAS interface rated at 12Gb/s transfer rate. A system backplane and controller that support 12Gb/s SAS are required for the drive to operate at its specified speed.

商品特色

  • 600 GB capacity stores large datasets
  • 10 000 RPM spindle delivers fast data access
  • SAS 12 Gb/s interface enables high-throughput transfers
  • 5 inch form factor fits dense server bays
  • Hot-swap tray allows drive replacement without downtime

商品規格

BrandDell
ModelF0V7R
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity600GB
RPM10000 RPM
Average Latency6Gb/s
Form Factor2.5"

商品問答

How do I install the 2.5" SAS drive in a hot-swap bay, and which step is often missed?

Slide the drive into the bay until the SAS connector seats firmly, then lock the carrier latch; the step most often missed is fully engaging the latch so the drive registers on the 12Gb/s backplane.

What maintenance or replacement will the 600GB 10000 RPM drive need over time?

Mechanical wear on the spindle and actuator means the drive itself will eventually require replacement; no user-serviceable parts exist inside the sealed enclosure.

What limit appears first when the 10K SAS drive runs sustained workloads?

The 12Gb/s SAS interface bandwidth and the 10000 RPM mechanical latency become the bottlenecks before the 600GB capacity fills.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。