Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Red filament spool 2.85mm 750g PhoneBox Red27

E3D Online

E3D Online spoolWorks EDGE Filament 2.85mm 750g PhoneBox Red27 3d printers accessory

SKU CH-NX60-HXZQK

Red PETG-based filament, 2.85 mm diameter and 750 g, prints with no fumes, low warp and strong layer adhesion

  • ColorRed
  • TypeFilament
  • Recyclable PETG-based material reduces environmental impact
  • Prints cleanly with no unpleasant fumes or odours
  • Strong, tough and naturally glossy finish for durable parts
  • Adheres to bed surfaces with just a little gluestick
  • Pairs with Scaffold support for reliable adhesion and clean breakaway

Material and diameter

E3D spoolWorks EDGE is a PETG-based filament supplied on a 750 g spool with a 2.85 mm diameter. It is formulated to combine ABS-like toughness with the easy printing characteristics of PLA, making it suitable for makers who want durable parts without the warp and fumes often associated with ABS. The material is fully recyclable and produces no unpleasant odours during extrusion.

Mechanical headroom

The filament delivers strong layer adhesion at a molecular level, so printed parts remain nearly as strong between layers as across them. It handles functional prototypes, brackets and enclosures that require impact resistance and stiffness, while its super-low contraction minimises warping on large flat surfaces. Extremely high-temperature applications or designs needing certified flame ratings fall outside its comfortable range.

Print behaviour

Edge prints cleanly without releasing harsh fumes, keeping the workspace comfortable during long jobs. A thin layer of gluestick on the bed provides reliable first-layer adhesion, and the material pairs with E3D Scaffold support filament for clean breakaway on complex overhangs and bridges. Its managed viscosity and melt strength allow tight bridging and accurate overhangs with minimal stringing or drooping.

Privalumai

  • Recyclable PETG-based material reduces environmental impact
  • Prints cleanly with no unpleasant fumes or odours
  • Strong, tough and naturally glossy finish for durable parts
  • Adheres to bed surfaces with just a little gluestick
  • Pairs with Scaffold support for reliable adhesion and clean breakaway

Specifikacijos

BrandE3D
ModelEdge
ColorRed
TypeFilament

Klausimai apie šią prekę

Will the 2.85mm diameter feed reliably through the Bowden tube on my older printer?

The filament is manufactured to a 2.85mm diameter, which matches the standard Bowden specification used by many earlier machines, so it feeds without binding or slipping.

How can I confirm the Edge filament is printing correctly on the first layer?

A correct first layer shows smooth, glossy lines that stick firmly with only a thin gluestick coat on the bed, and the brim or skirt lays down without curling at the corners.

Does the 750g spool include a desiccant pack or must I buy one separately?

The box contains the 750g spool of PhoneBox Red27 filament wound on a recyclable cardboard core; desiccant packs and any bed adhesive such as gluestick are sold separately.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.