Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green and pink dual-colour matte PLA filament on a 1 kg spool

eSUN

eSUN Dual Color Matte PLA Filament 1.75mm 1KG Green Pink

SKU CH-79XF-GVW35

Dual-colour matte PLA filament on a 1 kg spool with 1.75 mm diameter for FDM printers

  • ColorRed and Black
  • Type3D Printing Filament

Color Green Pink

  • Dual-colour matte finish adds visual depth without visible layer lines
  • Higher toughness than standard PLA reduces breakage in functional prints
  • Tight 1.75 mm tolerance ensures consistent feeding and stable extrusion
  • Tangle-free winding prevents nozzle clogs and failed prints
  • Recyclable spool and packaging reuse scrap material for lower waste

Dual-colour matte PLA for visual models

This 1.75 mm filament produces a matte surface with two colours co-extruded into a single strand, giving printed parts a layered colour effect without visible layer lines. It is aimed at makers creating decorative items, cosplay props, toys or display pieces where appearance matters more than mechanical strength. The spool holds 1 kg of material and is wound to avoid tangles during long prints.

Easy loading on common FDM printers

The filament feeds smoothly through direct-drive and Bowden extruders thanks to tight diameter tolerance and consistent roundness. Supports peel away cleanly, reducing post-processing time. The only common issue is ensuring the slicer temperature profile matches the matte formulation; running too hot can dull the finish or cause occasional stringing on fine details.

Check nozzle size and bed adhesion before ordering

A standard 0.4 mm nozzle works well, but smaller openings may clog if the dual-colour transition creates slight thickness variation. Verify that your print surface provides enough grip for the first layer; the matte surface can release from smooth PEI if the bed is not heated or prepared with adhesive. No enclosed chamber is required.

Privalumai

  • Dual-colour matte finish adds visual depth without visible layer lines
  • Higher toughness than standard PLA reduces breakage in functional prints
  • Tight 1.75 mm tolerance ensures consistent feeding and stable extrusion
  • Tangle-free winding prevents nozzle clogs and failed prints
  • Recyclable spool and packaging reuse scrap material for lower waste

Specifikacijos

BrandeSun
ModelPLA Filament
ColorRed and Black
Type3D Printing Filament

Kiti šio modelio variantai

Dar 2 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How can I confirm the 1.75 mm filament is feeding correctly after loading it?

Watch for smooth, constant extrusion without clogging; the dual-colour matte layers should bond well and show no obvious lines on the finished print.

Does the 1 KG spool include any tools or adapters, or must I buy them separately?

The box contains only the 1 KG filament on a recyclable spool; no tools, adapters or extra accessories are included.

Which colour combination should I choose for a model that needs clear colour separation?

The Green Pink variant provides distinct dual-colour co-extrusion with a matte finish that keeps the two hues separated while adding a subtle hierarchy.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.