Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green and pink dual-colour matte PLA filament on a 1 kg spool

eSUN

eSUN Dual Color Matte PLA Filament 1.75mm 1KG Green Pink

SKU CH-79XF-GVW35

Dual-colour matte PLA filament on a 1 kg spool with 1.75 mm diameter for FDM printers

  • ColorRed and Black
  • Type3D Printing Filament

Color Green Pink

  • Dual-colour matte finish adds visual depth without visible layer lines
  • Higher toughness than standard PLA reduces breakage in functional prints
  • Tight 1.75 mm tolerance ensures consistent feeding and stable extrusion
  • Tangle-free winding prevents nozzle clogs and failed prints
  • Recyclable spool and packaging reuse scrap material for lower waste

Dual-colour matte PLA for visual models

This 1.75 mm filament produces a matte surface with two colours co-extruded into a single strand, giving printed parts a layered colour effect without visible layer lines. It is aimed at makers creating decorative items, cosplay props, toys or display pieces where appearance matters more than mechanical strength. The spool holds 1 kg of material and is wound to avoid tangles during long prints.

Easy loading on common FDM printers

The filament feeds smoothly through direct-drive and Bowden extruders thanks to tight diameter tolerance and consistent roundness. Supports peel away cleanly, reducing post-processing time. The only common issue is ensuring the slicer temperature profile matches the matte formulation; running too hot can dull the finish or cause occasional stringing on fine details.

Check nozzle size and bed adhesion before ordering

A standard 0.4 mm nozzle works well, but smaller openings may clog if the dual-colour transition creates slight thickness variation. Verify that your print surface provides enough grip for the first layer; the matte surface can release from smooth PEI if the bed is not heated or prepared with adhesive. No enclosed chamber is required.

Přednosti

  • Dual-colour matte finish adds visual depth without visible layer lines
  • Higher toughness than standard PLA reduces breakage in functional prints
  • Tight 1.75 mm tolerance ensures consistent feeding and stable extrusion
  • Tangle-free winding prevents nozzle clogs and failed prints
  • Recyclable spool and packaging reuse scrap material for lower waste

Specifikace

BrandeSun
ModelPLA Filament
ColorRed and Black
Type3D Printing Filament

Další verze tohoto modelu

Dalších 2 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How can I confirm the 1.75 mm filament is feeding correctly after loading it?

Watch for smooth, constant extrusion without clogging; the dual-colour matte layers should bond well and show no obvious lines on the finished print.

Does the 1 KG spool include any tools or adapters, or must I buy them separately?

The box contains only the 1 KG filament on a recyclable spool; no tools, adapters or extra accessories are included.

Which colour combination should I choose for a model that needs clear colour separation?

The Green Pink variant provides distinct dual-colour co-extrusion with a matte finish that keeps the two hues separated while adding a subtle hierarchy.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.