Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two silver DDR4 modules with crystalline RGB light bars and mirrored aluminum heatspreaders

G.SKILL

G.SKILL F4-4000C18D-64GTRS Trident Z Royal 64GB (2x32GB) DDR4 4000 CL18 desktop RAM

SKU CH-HMFS-ZB93X MPN F4-4000C18D-64GTRS

64 GB dual-channel DDR4-4000 kit with CL18 timing, 1.40 V XMP 2.0 profile, and crystalline RGB light bars on silver mirror-finish heatspreaders

  • Capacity64GB (2 x 32GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 4000 (PC4 32000)
  • CAS LatencyCL18
  • Timing18-22-22-42
  • Voltage1.40V
  • 64 GB dual-channel kit for high-capacity multitasking
  • DDR4 4000 speed with CL18 latency for responsive performance
  • 40 V operation with 18-22-22-42 timings for stable tuning
  • Crystalline light bar with 8 RGB zones for customisable illumination
  • Silver mirror-finish aluminium heatspreaders for efficient cooling

Capacity and speed

This G.SKILL Trident Z Royal kit provides 64GB of DDR4 memory in two 32GB modules rated at 4000 MT/s with CL18 18-22-22-42 timings at 1.40V. It runs on Intel XMP 2.0 profiles and uses 288-pin unbuffered non-ECC DIMMs with aluminum heatspreaders and a crystalline RGB light bar.

Who this suits and who it does not

Builders who want high-capacity DDR4 with strong XMP speeds and addressable RGB lighting for a silver-themed system will match this kit well. Buyers who need ECC error correction, registered modules, lower voltage operation, or a different memory generation should look elsewhere.

What to check before ordering

Confirm your motherboard has four 288-pin DDR4 slots and supports dual-channel 64GB kits at the rated XMP 2.0 profile. Verify the CPU memory controller can handle the 4000 MT/s data rate and 1.40V operating voltage. Ensure case clearance accommodates the heatspreader height and that your RGB software or motherboard header can control the 8-zone lighting.

Privalumai

  • 64 GB dual-channel kit for high-capacity multitasking
  • DDR4 4000 speed with CL18 latency for responsive performance
  • 40 V operation with 18-22-22-42 timings for stable tuning
  • Crystalline light bar with 8 RGB zones for customisable illumination
  • Silver mirror-finish aluminium heatspreaders for efficient cooling

Specifikacijos

BrandG.SKILL
SeriesTrident Z Royal Series
ModelF4-4000C18D-64GTRS
Capacity64GB (2 x 32GB)
Type288-Pin PC RAM
SpeedDDR4 4000 (PC4 32000)
CAS LatencyCL18
Timing18-22-22-42
Voltage1.40V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorSilver
Heat SpreaderYes
FeaturesUnique crystalline light bar design.
Mirrored-finish aluminum heatspreaders in gold or silver.
Fluid rainbow wave default lighting effect.
Hand-screened IC & custom 10-layer PCB for improved overclock performance.
Intel XMP 2.0 Support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP
Recommend UseIntel Z590 / Z490
LED ColorRGB
Siuntos svoris0.25 kg
Pakuotės dydis175 × 135 × 22 mm

Klausimai apie šią prekę

What motherboard chipset is required to run the DDR4 4000 speed on this kit?

The kit is validated for Intel Z590 and Z490 chipsets with XMP 2.0 enabled.

Will the 1.40V modules work alongside older DDR4 sticks rated at 1.2V?

Mixing voltages is not recommended; the board will default all slots to the lowest common speed and voltage.

How can I confirm the 18-22-22-42 timings are active after enabling XMP?

Check the memory tab in CPU-Z or the BIOS memory information screen; it should read CL18-22-22-42 at 4000 MT/s.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.