BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
G.SKILL
64 GB dual-channel DDR4-4000 kit with CL18 timing, 1.40 V XMP 2.0 profile, and crystalline RGB light bars on silver mirror-finish heatspreaders
This G.SKILL Trident Z Royal kit provides 64GB of DDR4 memory in two 32GB modules rated at 4000 MT/s with CL18 18-22-22-42 timings at 1.40V. It runs on Intel XMP 2.0 profiles and uses 288-pin unbuffered non-ECC DIMMs with aluminum heatspreaders and a crystalline RGB light bar.
Builders who want high-capacity DDR4 with strong XMP speeds and addressable RGB lighting for a silver-themed system will match this kit well. Buyers who need ECC error correction, registered modules, lower voltage operation, or a different memory generation should look elsewhere.
Confirm your motherboard has four 288-pin DDR4 slots and supports dual-channel 64GB kits at the rated XMP 2.0 profile. Verify the CPU memory controller can handle the 4000 MT/s data rate and 1.40V operating voltage. Ensure case clearance accommodates the heatspreader height and that your RGB software or motherboard header can control the 8-zone lighting.
| Brand | G.SKILL |
|---|---|
| Series | Trident Z Royal Series |
| Model | F4-4000C18D-64GTRS |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 4000 (PC4 32000) |
| CAS Latency | CL18 |
| Timing | 18-22-22-42 |
| Voltage | 1.40V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Silver |
| Heat Spreader | Yes |
| Features | Unique crystalline light bar design. Mirrored-finish aluminum heatspreaders in gold or silver. Fluid rainbow wave default lighting effect. Hand-screened IC & custom 10-layer PCB for improved overclock performance. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP |
| Recommend Use | Intel Z590 / Z490 |
| LED Color | RGB |
| Sūtījuma svars | 0.25 kg |
| Sūtījuma izmēri | 175 × 135 × 22 mm |
The kit is validated for Intel Z590 and Z490 chipsets with XMP 2.0 enabled.
Mixing voltages is not recommended; the board will default all slots to the lowest common speed and voltage.
Check the memory tab in CPU-Z or the BIOS memory information screen; it should read CL18-22-22-42 at 4000 MT/s.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?