BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
G.SKILL
64 GB dual-channel DDR4-4000 kit with CL18 timing, 1.40 V XMP 2.0 profile, and crystalline RGB light bars on silver mirror-finish heatspreaders
This G.SKILL Trident Z Royal kit provides 64GB of DDR4 memory in two 32GB modules rated at 4000 MT/s with CL18 18-22-22-42 timings at 1.40V. It runs on Intel XMP 2.0 profiles and uses 288-pin unbuffered non-ECC DIMMs with aluminum heatspreaders and a crystalline RGB light bar.
Builders who want high-capacity DDR4 with strong XMP speeds and addressable RGB lighting for a silver-themed system will match this kit well. Buyers who need ECC error correction, registered modules, lower voltage operation, or a different memory generation should look elsewhere.
Confirm your motherboard has four 288-pin DDR4 slots and supports dual-channel 64GB kits at the rated XMP 2.0 profile. Verify the CPU memory controller can handle the 4000 MT/s data rate and 1.40V operating voltage. Ensure case clearance accommodates the heatspreader height and that your RGB software or motherboard header can control the 8-zone lighting.
| Brand | G.SKILL |
|---|---|
| Series | Trident Z Royal Series |
| Model | F4-4000C18D-64GTRS |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 4000 (PC4 32000) |
| CAS Latency | CL18 |
| Timing | 18-22-22-42 |
| Voltage | 1.40V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Silver |
| Heat Spreader | Yes |
| Features | Unique crystalline light bar design. Mirrored-finish aluminum heatspreaders in gold or silver. Fluid rainbow wave default lighting effect. Hand-screened IC & custom 10-layer PCB for improved overclock performance. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP |
| Recommend Use | Intel Z590 / Z490 |
| LED Color | RGB |
| 出貨重量 | 0.25 kg |
| 包裝尺寸 | 175 × 135 × 22 mm |
The kit is validated for Intel Z590 and Z490 chipsets with XMP 2.0 enabled.
Mixing voltages is not recommended; the board will default all slots to the lowest common speed and voltage.
Check the memory tab in CPU-Z or the BIOS memory information screen; it should read CL18-22-22-42 at 4000 MT/s.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?