NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
GAMDIAS Technology
E-ATX mid-tower with four 140 mm PWM fans, 430 mm GPU clearance and a 238 mm wide mesh front for high-airflow builds
The GAMDIAS Technology ATHENA P3 is a 238 mm wide mid-tower that accepts Extended ATX motherboards up to the smaller E-ATX form factor. Four pre-installed 140 mm PWM fans and a dedicated gap bridging bracket deliver high-volume airflow through the bar-patterned mesh front panel. A perforated PSU chamber and integrated cable routing support cleaner builds with longer power supplies.
Enthusiasts who want strong out-of-the-box cooling for long graphics cards and tall CPU coolers will appreciate the 430 mm GPU clearance and 180 mm cooler height limit. The included 8-port PWM ARGB hub simplifies fan management for custom loops or air towers. Builders needing front-mounted 420 mm radiators or multiple 3.5 inch drive stacks should consider wider alternatives.
The single specification that determines compatibility is the maximum graphics card length of 430 mm. Measure your card including any backplate or power connector overhang before ordering. If the card exceeds this figure the side panel will not close and airflow will be compromised.
| Brand | Gamdias |
|---|---|
| Series | ATHENA |
| Model | P3 |
| Type | E-ATX Mid Tower Chassis |
| Color | Black |
| Motherboard Compatibility | Extended ATX |
| Side Panel | with Side Window |
| Dust Filters | Top and Bottom |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 2 |
| 140mm Fans | 4 |
| Max GPU Length | 430 mm |
| Max CPU Cooler Height | 180 mm |
| Max PSU Length | 220 mm |
| Dimensions | 500 x 238 x 500 mm |
| Weight | 20 lbs |
The chassis accepts graphics cards up to 430 mm long and CPU coolers up to 180 mm tall, so both components fit within the stated limits.
Plug each fan into the supplied 8-port PWM fan hub, then connect the hub’s single PWM header to the motherboard CPU_FAN or SYS_FAN header for unified speed control.
Remove and rinse the magnetic top and bottom filters every few months, or sooner if airflow feels restricted, to keep the four 140 mm fans moving air efficiently.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?