NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
GAMDIAS Technology
E-ATX mid-tower with four 140 mm PWM fans, 430 mm GPU clearance and a 238 mm wide mesh front for high-airflow builds
The GAMDIAS Technology ATHENA P3 is a 238 mm wide mid-tower that accepts Extended ATX motherboards up to the smaller E-ATX form factor. Four pre-installed 140 mm PWM fans and a dedicated gap bridging bracket deliver high-volume airflow through the bar-patterned mesh front panel. A perforated PSU chamber and integrated cable routing support cleaner builds with longer power supplies.
Enthusiasts who want strong out-of-the-box cooling for long graphics cards and tall CPU coolers will appreciate the 430 mm GPU clearance and 180 mm cooler height limit. The included 8-port PWM ARGB hub simplifies fan management for custom loops or air towers. Builders needing front-mounted 420 mm radiators or multiple 3.5 inch drive stacks should consider wider alternatives.
The single specification that determines compatibility is the maximum graphics card length of 430 mm. Measure your card including any backplate or power connector overhang before ordering. If the card exceeds this figure the side panel will not close and airflow will be compromised.
| Brand | Gamdias |
|---|---|
| Series | ATHENA |
| Model | P3 |
| Type | E-ATX Mid Tower Chassis |
| Color | Black |
| Motherboard Compatibility | Extended ATX |
| Side Panel | with Side Window |
| Dust Filters | Top and Bottom |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 2 |
| 140mm Fans | 4 |
| Max GPU Length | 430 mm |
| Max CPU Cooler Height | 180 mm |
| Max PSU Length | 220 mm |
| Dimensions | 500 x 238 x 500 mm |
| Weight | 20 lbs |
The chassis accepts graphics cards up to 430 mm long and CPU coolers up to 180 mm tall, so both components fit within the stated limits.
Plug each fan into the supplied 8-port PWM fan hub, then connect the hub’s single PWM header to the motherboard CPU_FAN or SYS_FAN header for unified speed control.
Remove and rinse the magnetic top and bottom filters every few months, or sooner if airflow feels restricted, to keep the four 140 mm fans moving air efficiently.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?