NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
GAMDIAS Technology
E-ATX mid-tower with four 140 mm PWM fans, 430 mm GPU clearance and a 238 mm wide mesh front for high-airflow builds
The GAMDIAS Technology ATHENA P3 is a 238 mm wide mid-tower that accepts Extended ATX motherboards up to the smaller E-ATX form factor. Four pre-installed 140 mm PWM fans and a dedicated gap bridging bracket deliver high-volume airflow through the bar-patterned mesh front panel. A perforated PSU chamber and integrated cable routing support cleaner builds with longer power supplies.
Enthusiasts who want strong out-of-the-box cooling for long graphics cards and tall CPU coolers will appreciate the 430 mm GPU clearance and 180 mm cooler height limit. The included 8-port PWM ARGB hub simplifies fan management for custom loops or air towers. Builders needing front-mounted 420 mm radiators or multiple 3.5 inch drive stacks should consider wider alternatives.
The single specification that determines compatibility is the maximum graphics card length of 430 mm. Measure your card including any backplate or power connector overhang before ordering. If the card exceeds this figure the side panel will not close and airflow will be compromised.
| Brand | Gamdias |
|---|---|
| Series | ATHENA |
| Model | P3 |
| Type | E-ATX Mid Tower Chassis |
| Color | Black |
| Motherboard Compatibility | Extended ATX |
| Side Panel | with Side Window |
| Dust Filters | Top and Bottom |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 2 |
| 140mm Fans | 4 |
| Max GPU Length | 430 mm |
| Max CPU Cooler Height | 180 mm |
| Max PSU Length | 220 mm |
| Dimensions | 500 x 238 x 500 mm |
| Weight | 20 lbs |
The chassis accepts graphics cards up to 430 mm long and CPU coolers up to 180 mm tall, so both components fit within the stated limits.
Plug each fan into the supplied 8-port PWM fan hub, then connect the hub’s single PWM header to the motherboard CPU_FAN or SYS_FAN header for unified speed control.
Remove and rinse the magnetic top and bottom filters every few months, or sooner if airflow feels restricted, to keep the four 140 mm fans moving air efficiently.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?