Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small rectangular metal backplane kit with SAS SATA connectors for DL360 Gen10 server

HPE

HPE 867966-B21 DL360 Gen10 2SFF SAS/SATA backplane kit

SKU CH-5M5H-B8D06 MPN 867966-B21

Adds two small-form-factor SAS or SATA drive bays to a ProLiant DL360 Gen10 server

  • Adds two 2.5-inch drive bays to DL360 Gen10
  • Supports both SAS and SATA drive interfaces
  • Compact kit measures 12.7 x 16.51 x 2.54 cm
  • Lightweight at 0.68 kg for easy installation
  • Purpose-built for HPE ProLiant DL360 Gen10 server

HPE DL360 Gen10 2SFF Backplane Kit

This kit adds a 2SFF SAS/SATA backplane to a ProLiant DL360 Gen10 server. It provides the hardware needed to install two small-form-factor drives using SAS or SATA interfaces. The part is supplied new and matches HPE part number 867966-B21.

Who This Suits and Who It Does Not

The kit suits administrators expanding internal storage on a compatible DL360 Gen10 chassis. It does not suit buyers who need a different drive count or a different server model. It also does not suit systems that lack the required backplane mounting points or cabling.

Deciding Specification — SAS/SATA Interface

The backplane supports SAS and SATA drives only, so drive selection must match those interfaces. The kit occupies the 2SFF front bay and weighs 0.68 kg. Verify that the server configuration includes the necessary drive cages and cables before ordering.

Privalumai

  • Adds two 2.5-inch drive bays to DL360 Gen10
  • Supports both SAS and SATA drive interfaces
  • Compact kit measures 12.7 x 16.51 x 2.54 cm
  • Lightweight at 0.68 kg for easy installation
  • Purpose-built for HPE ProLiant DL360 Gen10 server

Specifikacijos

BrandHPE
SeriesProLiant DL360 G10
Model867966-B21
Siuntos svoris0.64 kg
Pakuotės dydis255 × 225 × 70 mm

Klausimai apie šią prekę

What chassis dimensions does the 2SFF backplane kit occupy in the DL360 Gen10?

The kit measures 12.7 x 16.51 x 2.54 cm and fits the standard front drive cage area of the server.

How is the 867966-B21 backplane connected to the system board during installation?

Align the SAS/SATA connector on the backplane with the system board header and press firmly until the latch clicks; the step often missed is securing the retention screw after seating.

When should the SAS/SATA backplane be replaced in a DL360 Gen10?

Replace it if drive LEDs stay amber, the controller reports persistent link errors on multiple bays, or the backplane shows physical damage such as bent pins.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.