HPE
HPE 867966-B21 DL360 Gen10 2SFF SAS/SATA backplane kit
Adds two small-form-factor SAS or SATA drive bays to a ProLiant DL360 Gen10 server
- Adds two 2.5-inch drive bays to DL360 Gen10
- Supports both SAS and SATA drive interfaces
- Compact kit measures 12.7 x 16.51 x 2.54 cm
- Lightweight at 0.68 kg for easy installation
- Purpose-built for HPE ProLiant DL360 Gen10 server
HPE DL360 Gen10 2SFF Backplane Kit
This kit adds a 2SFF SAS/SATA backplane to a ProLiant DL360 Gen10 server. It provides the hardware needed to install two small-form-factor drives using SAS or SATA interfaces. The part is supplied new and matches HPE part number 867966-B21.
Who This Suits and Who It Does Not
The kit suits administrators expanding internal storage on a compatible DL360 Gen10 chassis. It does not suit buyers who need a different drive count or a different server model. It also does not suit systems that lack the required backplane mounting points or cabling.
Deciding Specification — SAS/SATA Interface
The backplane supports SAS and SATA drives only, so drive selection must match those interfaces. The kit occupies the 2SFF front bay and weighs 0.68 kg. Verify that the server configuration includes the necessary drive cages and cables before ordering.
Highlights
- Adds two 2.5-inch drive bays to DL360 Gen10
- Supports both SAS and SATA drive interfaces
- Compact kit measures 12.7 x 16.51 x 2.54 cm
- Lightweight at 0.68 kg for easy installation
- Purpose-built for HPE ProLiant DL360 Gen10 server
Specifications
| Brand | HPE |
|---|---|
| Series | ProLiant DL360 G10 |
| Model | 867966-B21 |
| Shipping weight | 0.64 kg |
| Package size | 255 × 225 × 70 mm |
Questions about this item
What chassis dimensions does the 2SFF backplane kit occupy in the DL360 Gen10?
The kit measures 12.7 x 16.51 x 2.54 cm and fits the standard front drive cage area of the server.
How is the 867966-B21 backplane connected to the system board during installation?
Align the SAS/SATA connector on the backplane with the system board header and press firmly until the latch clicks; the step often missed is securing the retention screw after seating.
When should the SAS/SATA backplane be replaced in a DL360 Gen10?
Replace it if drive LEDs stay amber, the controller reports persistent link errors on multiple bays, or the backplane shows physical damage such as bent pins.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
