Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Small rectangular metal backplane kit with SAS SATA connectors for DL360 Gen10 server

HPE

HPE 867966-B21 DL360 Gen10 2SFF SAS/SATA backplane kit

SKU CH-5M5H-B8D06 MPN 867966-B21

Adds two small-form-factor SAS or SATA drive bays to a ProLiant DL360 Gen10 server

  • Adds two 2.5-inch drive bays to DL360 Gen10
  • Supports both SAS and SATA drive interfaces
  • Compact kit measures 12.7 x 16.51 x 2.54 cm
  • Lightweight at 0.68 kg for easy installation
  • Purpose-built for HPE ProLiant DL360 Gen10 server

HPE DL360 Gen10 2SFF Backplane Kit

This kit adds a 2SFF SAS/SATA backplane to a ProLiant DL360 Gen10 server. It provides the hardware needed to install two small-form-factor drives using SAS or SATA interfaces. The part is supplied new and matches HPE part number 867966-B21.

Who This Suits and Who It Does Not

The kit suits administrators expanding internal storage on a compatible DL360 Gen10 chassis. It does not suit buyers who need a different drive count or a different server model. It also does not suit systems that lack the required backplane mounting points or cabling.

Deciding Specification — SAS/SATA Interface

The backplane supports SAS and SATA drives only, so drive selection must match those interfaces. The kit occupies the 2SFF front bay and weighs 0.68 kg. Verify that the server configuration includes the necessary drive cages and cables before ordering.

Prednosti

  • Adds two 2.5-inch drive bays to DL360 Gen10
  • Supports both SAS and SATA drive interfaces
  • Compact kit measures 12.7 x 16.51 x 2.54 cm
  • Lightweight at 0.68 kg for easy installation
  • Purpose-built for HPE ProLiant DL360 Gen10 server

Špecifikácie

BrandHPE
SeriesProLiant DL360 G10
Model867966-B21
Prepravná hmotnosť0.64 kg
Rozmery balenia255 × 225 × 70 mm

Otázky k tomuto produktu

What chassis dimensions does the 2SFF backplane kit occupy in the DL360 Gen10?

The kit measures 12.7 x 16.51 x 2.54 cm and fits the standard front drive cage area of the server.

How is the 867966-B21 backplane connected to the system board during installation?

Align the SAS/SATA connector on the backplane with the system board header and press firmly until the latch clicks; the step often missed is securing the retention screw after seating.

When should the SAS/SATA backplane be replaced in a DL360 Gen10?

Replace it if drive LEDs stay amber, the controller reports persistent link errors on multiple bays, or the backplane shows physical damage such as bent pins.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.