Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

HPE

HPE EG1200FCVBQKEY_TAB 1.2 TB 10000 rpm 2.5" SAS internal hard drive

SKU CH-MGWY-C7BSQ MPN EG1200FCVBQKEY_TAB

A 1.2 TB, 10 000 rpm SAS hard drive in a 2.5 inch hot-pluggable form factor

  • 2 TB capacity stores large datasets
  • 10 000 rpm spindle speed accelerates data access
  • SAS 6 Gb/s interface enables fast transfers
  • 5 inch form factor fits compact bays
  • Hot-pluggable design allows drive swaps without downtime

1.2 TB SAS 10000 rpm drive

This 1.20 TB hard drive uses a 2.5-inch form factor and a SAS interface running at 6Gb/s. A spindle speed of 10000 rpm supports demanding enterprise workloads. The unit is hot-pluggable and ships new in a sealed package.

Suits SAS bays needing 512n sectors

It fits servers and arrays that accept 2.5-inch SAS drives with a 512n sector format. Buyers whose chassis only accommodate 3.5-inch bays or who require a different sector size should look elsewhere.

SAS 6Gb/s interface and 512n format

The drive connects through a SAS 6Gb/s port and presents 512-byte native sectors to the controller. Compatibility depends on the host supporting this exact interface and sector geometry.

Privalumai

  • 2 TB capacity stores large datasets
  • 10 000 rpm spindle speed accelerates data access
  • SAS 6 Gb/s interface enables fast transfers
  • 5 inch form factor fits compact bays
  • Hot-pluggable design allows drive swaps without downtime

Specifikacijos

BrandHPE
ModelEG1200FCVBQ

Klausimai apie šią prekę

What 2.5" drive bay and SAS backplane does the EG1200FCVBQKEY_TAB need to fit?

The 1.20 TB drive uses a 2.5" small-form-factor chassis and connects to a 6Gb/s SAS backplane; it is hot-pluggable so the bay must support SAS hot-plug carriers.

How do I install the 1.20 TB SAS drive in an HPE Gen8 or Gen9 server, and what step is often missed?

Slide the drive into the hot-plug carrier until the latch clicks, then press the carrier release lever fully until it locks; the step often missed is not seating the lever completely, which leaves the drive offline.

When will the 10000 rpm SAS drive need replacement, and what should I monitor?

Monitor SMART reallocated-sector count and latency; plan replacement when reallocated sectors exceed 512 or latency rises above 10 ms, as the 10000 rpm spindle wears faster than lower-speed drives.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.