HPE
HPE EG1200FCVBQKEY_TAB 1.2 TB 10000 rpm 2.5" SAS internal hard drive
A 1.2 TB, 10 000 rpm SAS hard drive in a 2.5 inch hot-pluggable form factor
- 2 TB capacity stores large datasets
- 10 000 rpm spindle speed accelerates data access
- SAS 6 Gb/s interface enables fast transfers
- 5 inch form factor fits compact bays
- Hot-pluggable design allows drive swaps without downtime
1.2 TB SAS 10000 rpm drive
This 1.20 TB hard drive uses a 2.5-inch form factor and a SAS interface running at 6Gb/s. A spindle speed of 10000 rpm supports demanding enterprise workloads. The unit is hot-pluggable and ships new in a sealed package.
Suits SAS bays needing 512n sectors
It fits servers and arrays that accept 2.5-inch SAS drives with a 512n sector format. Buyers whose chassis only accommodate 3.5-inch bays or who require a different sector size should look elsewhere.
SAS 6Gb/s interface and 512n format
The drive connects through a SAS 6Gb/s port and presents 512-byte native sectors to the controller. Compatibility depends on the host supporting this exact interface and sector geometry.
Najważniejsze cechy
- 2 TB capacity stores large datasets
- 10 000 rpm spindle speed accelerates data access
- SAS 6 Gb/s interface enables fast transfers
- 5 inch form factor fits compact bays
- Hot-pluggable design allows drive swaps without downtime
Specyfikacja
| Brand | HPE |
|---|---|
| Model | EG1200FCVBQ |
Pytania dotyczące tego produktu
What 2.5" drive bay and SAS backplane does the EG1200FCVBQKEY_TAB need to fit?
The 1.20 TB drive uses a 2.5" small-form-factor chassis and connects to a 6Gb/s SAS backplane; it is hot-pluggable so the bay must support SAS hot-plug carriers.
How do I install the 1.20 TB SAS drive in an HPE Gen8 or Gen9 server, and what step is often missed?
Slide the drive into the hot-plug carrier until the latch clicks, then press the carrier release lever fully until it locks; the step often missed is not seating the lever completely, which leaves the drive offline.
When will the 10000 rpm SAS drive need replacement, and what should I monitor?
Monitor SMART reallocated-sector count and latency; plan replacement when reallocated sectors exceed 512 or latency rises above 10 ms, as the 10000 rpm spindle wears faster than lower-speed drives.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
