Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small silver 2.5 inch SAS hard drive with label

HPE

HPE EG1200FCVBQKEY_TAB 1.2 TB 10000 rpm 2.5" SAS internal hard drive

SKU CH-MGWY-C7BSQ MPN EG1200FCVBQKEY_TAB

A 1.2 TB, 10 000 rpm SAS hard drive in a 2.5 inch hot-pluggable form factor

  • 2 TB capacity stores large datasets
  • 10 000 rpm spindle speed accelerates data access
  • SAS 6 Gb/s interface enables fast transfers
  • 5 inch form factor fits compact bays
  • Hot-pluggable design allows drive swaps without downtime

1.2 TB SAS 10000 rpm drive

This 1.20 TB hard drive uses a 2.5-inch form factor and a SAS interface running at 6Gb/s. A spindle speed of 10000 rpm supports demanding enterprise workloads. The unit is hot-pluggable and ships new in a sealed package.

Suits SAS bays needing 512n sectors

It fits servers and arrays that accept 2.5-inch SAS drives with a 512n sector format. Buyers whose chassis only accommodate 3.5-inch bays or who require a different sector size should look elsewhere.

SAS 6Gb/s interface and 512n format

The drive connects through a SAS 6Gb/s port and presents 512-byte native sectors to the controller. Compatibility depends on the host supporting this exact interface and sector geometry.

Helstu kostir

  • 2 TB capacity stores large datasets
  • 10 000 rpm spindle speed accelerates data access
  • SAS 6 Gb/s interface enables fast transfers
  • 5 inch form factor fits compact bays
  • Hot-pluggable design allows drive swaps without downtime

Tæknilýsing

BrandHPE
ModelEG1200FCVBQ

Spurningar um þessa vöru

What 2.5" drive bay and SAS backplane does the EG1200FCVBQKEY_TAB need to fit?

The 1.20 TB drive uses a 2.5" small-form-factor chassis and connects to a 6Gb/s SAS backplane; it is hot-pluggable so the bay must support SAS hot-plug carriers.

How do I install the 1.20 TB SAS drive in an HPE Gen8 or Gen9 server, and what step is often missed?

Slide the drive into the hot-plug carrier until the latch clicks, then press the carrier release lever fully until it locks; the step often missed is not seating the lever completely, which leaves the drive offline.

When will the 10000 rpm SAS drive need replacement, and what should I monitor?

Monitor SMART reallocated-sector count and latency; plan replacement when reallocated sectors exceed 512 or latency rises above 10 ms, as the 10000 rpm spindle wears faster than lower-speed drives.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.