SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
IBM
A 600 GB 2.5-inch SAS hard drive spinning at 10000 RPM with a 6 Gb/s interface for high-performance server storage
This 600 GB 2.5-inch SAS hard drive spins at 10000 RPM and connects through a 6 Gb/s interface. It is built for servers and storage arrays that need fast, reliable mechanical storage in a compact hot-swap form factor. The drive is new and ready for deployment in compatible IBM System x and similar enterprise chassis.
The single specification that decides fit is the SAS 6 Gb/s interface combined with a 10000 RPM spindle speed. A backplane or controller must support 6 Gb/s SAS signalling; SATA-only controllers will not recognise the drive. The 10000 RPM rotation delivers higher IOPS than 7200 RPM nearline drives for transactional workloads.
The drive mounts in a 2.5-inch hot-swap tray that slides into tool-less drive bays on supported servers. It requires a SAS backplane with 6 Gb/s capability and adequate cooling for 10000 RPM operation. Using this form factor frees 3.5-inch bays for higher-capacity nearline drives while keeping performance-critical data on the faster spindles.
| Brand | IBM |
|---|---|
| Model | 90Y8872 |
| Interface | SAS 6Gb/s |
| Capacity | 600GB |
| RPM | 10000 RPM |
| Features | This 10000 rpm 6 Gbps 2.5-inch hot-swap SAS drive offers the highest performance. It has outstanding reliability that enables operation in RAID environments without compromising application performance or availability. |
| Form Factor | 2.5" |
| Siuntos svoris | 0.57 kg |
| Pakuotės dydis | 147 × 102 × 25 mm |
The spindle spins at 10000 RPM, which reduces average rotational latency and helps sustain higher sequential read and write rates in RAID arrays compared with 7200 RPM drives.
The SAS link runs at 6Gb/s, capping the maximum burst transfer at that rate; sustained throughput will be lower and depends on the drive's internal media speed and the controller.
The drive is a 2.5-inch form factor; it requires a 2.5-inch hot-swap tray or an adapter bracket to mount in a 3.5-inch bay.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?