SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
IBM
A 600 GB 2.5-inch SAS hard drive spinning at 10000 RPM with a 6 Gb/s interface for high-performance server storage
This 600 GB 2.5-inch SAS hard drive spins at 10000 RPM and connects through a 6 Gb/s interface. It is built for servers and storage arrays that need fast, reliable mechanical storage in a compact hot-swap form factor. The drive is new and ready for deployment in compatible IBM System x and similar enterprise chassis.
The single specification that decides fit is the SAS 6 Gb/s interface combined with a 10000 RPM spindle speed. A backplane or controller must support 6 Gb/s SAS signalling; SATA-only controllers will not recognise the drive. The 10000 RPM rotation delivers higher IOPS than 7200 RPM nearline drives for transactional workloads.
The drive mounts in a 2.5-inch hot-swap tray that slides into tool-less drive bays on supported servers. It requires a SAS backplane with 6 Gb/s capability and adequate cooling for 10000 RPM operation. Using this form factor frees 3.5-inch bays for higher-capacity nearline drives while keeping performance-critical data on the faster spindles.
| Brand | IBM |
|---|---|
| Model | 90Y8872 |
| Interface | SAS 6Gb/s |
| Capacity | 600GB |
| RPM | 10000 RPM |
| Features | This 10000 rpm 6 Gbps 2.5-inch hot-swap SAS drive offers the highest performance. It has outstanding reliability that enables operation in RAID environments without compromising application performance or availability. |
| Form Factor | 2.5" |
| Sūtījuma svars | 0.57 kg |
| Sūtījuma izmēri | 147 × 102 × 25 mm |
The spindle spins at 10000 RPM, which reduces average rotational latency and helps sustain higher sequential read and write rates in RAID arrays compared with 7200 RPM drives.
The SAS link runs at 6Gb/s, capping the maximum burst transfer at that rate; sustained throughput will be lower and depends on the drive's internal media speed and the controller.
The drive is a 2.5-inch form factor; it requires a 2.5-inch hot-swap tray or an adapter bracket to mount in a 3.5-inch bay.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?