SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
IBM
A 600 GB 2.5-inch SAS hard drive spinning at 10000 RPM with a 6 Gb/s interface for high-performance server storage
This 600 GB 2.5-inch SAS hard drive spins at 10000 RPM and connects through a 6 Gb/s interface. It is built for servers and storage arrays that need fast, reliable mechanical storage in a compact hot-swap form factor. The drive is new and ready for deployment in compatible IBM System x and similar enterprise chassis.
The single specification that decides fit is the SAS 6 Gb/s interface combined with a 10000 RPM spindle speed. A backplane or controller must support 6 Gb/s SAS signalling; SATA-only controllers will not recognise the drive. The 10000 RPM rotation delivers higher IOPS than 7200 RPM nearline drives for transactional workloads.
The drive mounts in a 2.5-inch hot-swap tray that slides into tool-less drive bays on supported servers. It requires a SAS backplane with 6 Gb/s capability and adequate cooling for 10000 RPM operation. Using this form factor frees 3.5-inch bays for higher-capacity nearline drives while keeping performance-critical data on the faster spindles.
| Brand | IBM |
|---|---|
| Model | 90Y8872 |
| Interface | SAS 6Gb/s |
| Capacity | 600GB |
| RPM | 10000 RPM |
| Features | This 10000 rpm 6 Gbps 2.5-inch hot-swap SAS drive offers the highest performance. It has outstanding reliability that enables operation in RAID environments without compromising application performance or availability. |
| Form Factor | 2.5" |
| Lähetyspaino | 0.57 kg |
| Pakkauksen mitat | 147 × 102 × 25 mm |
The spindle spins at 10000 RPM, which reduces average rotational latency and helps sustain higher sequential read and write rates in RAID arrays compared with 7200 RPM drives.
The SAS link runs at 6Gb/s, capping the maximum burst transfer at that rate; sustained throughput will be lower and depends on the drive's internal media speed and the controller.
The drive is a 2.5-inch form factor; it requires a 2.5-inch hot-swap tray or an adapter bracket to mount in a 3.5-inch bay.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?