JONSBO C6 White Micro ATX Mesh PC Case
- Micro ATX / Mini-ITX
- White
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
JONSBO
Compact steel Micro-ATX chassis with mesh panels, tool-free panels, one 3.5-inch and two 2.5-inch bays, GPU clearance to 255 mm, CPU cooler limit 75 mm, PSU limit 185 mm.
Options C6 Black
The JONSBO C6 Black is a steel Micro ATX and Mini-ITX case with mesh on all sides for open airflow. It suits builders who want a small desktop footprint with room for a modest graphics card and a choice of 3.5-inch or 2.5-inch storage.
Verify your CPU cooler height stays within 75 mm and your power supply length does not exceed 185 mm. Graphics cards must fit the 220-255 mm maximum length and the motherboard must be Micro ATX or Mini-ITX. No bottom dust filter is mentioned beyond the single bottom filter.
Three fan positions across front, top and bottom accept 120 mm or 140 mm fans to move air through the full mesh panels. This layout helps steady temperatures during long sessions rather than only short bursts. The tool-free top and side panels allow quick access if fan cleaning becomes necessary.
| Brand | Jonsbo |
|---|---|
| Type | Micro ATX / Mini-ITX |
| Color | Black |
| Case Material | Steel |
| Motherboard Compatibility | Micro ATX / Mini ITX |
| Dust Filters | Bottom |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 2 |
| Fan Options | Bottom - 1 x 120mm / Bottom - 1 x 140mm / Front - 1 x 120mm / Top - 1 x 120mm / Top - 1 x 140mm |
| Max GPU Length | 220-255mm |
| Max CPU Cooler Height | 75 mm |
| Max PSU Length | 185 mm |
Kiti šio modelio variantai
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
No fans are included with the case. It provides mounting points for one 120 mm or 140 mm fan at the bottom, one 120 mm fan at the front, and one 120 mm or 140 mm fan at the top, so you will need to purchase fans separately.
The case fits either one 3.5 inch hard drive or up to two 2.5 inch solid-state drives in the same mounting area. Choose the 3.5 inch bay for higher capacity mechanical storage, or the two 2.5 inch bays if you prefer faster SSDs and can work within their capacity limits.
Your graphics card must not exceed 255 mm in length. Measure the card you plan to use; if it is longer it will not fit, and if it is close to the limit you should verify cable clearance at the front of the case.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?