JONSBO C6 White Micro ATX Mesh PC Case
- Micro ATX / Mini-ITX
- White
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
JONSBO
Compact steel Micro-ATX chassis with mesh panels, tool-free panels, one 3.5-inch and two 2.5-inch bays, GPU clearance to 255 mm, CPU cooler limit 75 mm, PSU limit 185 mm.
Options C6 Black
The JONSBO C6 Black is a steel Micro ATX and Mini-ITX case with mesh on all sides for open airflow. It suits builders who want a small desktop footprint with room for a modest graphics card and a choice of 3.5-inch or 2.5-inch storage.
Verify your CPU cooler height stays within 75 mm and your power supply length does not exceed 185 mm. Graphics cards must fit the 220-255 mm maximum length and the motherboard must be Micro ATX or Mini-ITX. No bottom dust filter is mentioned beyond the single bottom filter.
Three fan positions across front, top and bottom accept 120 mm or 140 mm fans to move air through the full mesh panels. This layout helps steady temperatures during long sessions rather than only short bursts. The tool-free top and side panels allow quick access if fan cleaning becomes necessary.
| Brand | Jonsbo |
|---|---|
| Type | Micro ATX / Mini-ITX |
| Color | Black |
| Case Material | Steel |
| Motherboard Compatibility | Micro ATX / Mini ITX |
| Dust Filters | Bottom |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 2 |
| Fan Options | Bottom - 1 x 120mm / Bottom - 1 x 140mm / Front - 1 x 120mm / Top - 1 x 120mm / Top - 1 x 140mm |
| Max GPU Length | 220-255mm |
| Max CPU Cooler Height | 75 mm |
| Max PSU Length | 185 mm |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
No fans are included with the case. It provides mounting points for one 120 mm or 140 mm fan at the bottom, one 120 mm fan at the front, and one 120 mm or 140 mm fan at the top, so you will need to purchase fans separately.
The case fits either one 3.5 inch hard drive or up to two 2.5 inch solid-state drives in the same mounting area. Choose the 3.5 inch bay for higher capacity mechanical storage, or the two 2.5 inch bays if you prefer faster SSDs and can work within their capacity limits.
Your graphics card must not exceed 255 mm in length. Measure the card you plan to use; if it is longer it will not fit, and if it is close to the limit you should verify cable clearance at the front of the case.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?