JONSBO C6 White Micro ATX Mesh PC Case
- Micro ATX / Mini-ITX
- White
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
JONSBO
Compact steel Micro-ATX chassis with mesh panels, tool-free panels, one 3.5-inch and two 2.5-inch bays, GPU clearance to 255 mm, CPU cooler limit 75 mm, PSU limit 185 mm.
Options C6 Black
The JONSBO C6 Black is a steel Micro ATX and Mini-ITX case with mesh on all sides for open airflow. It suits builders who want a small desktop footprint with room for a modest graphics card and a choice of 3.5-inch or 2.5-inch storage.
Verify your CPU cooler height stays within 75 mm and your power supply length does not exceed 185 mm. Graphics cards must fit the 220-255 mm maximum length and the motherboard must be Micro ATX or Mini-ITX. No bottom dust filter is mentioned beyond the single bottom filter.
Three fan positions across front, top and bottom accept 120 mm or 140 mm fans to move air through the full mesh panels. This layout helps steady temperatures during long sessions rather than only short bursts. The tool-free top and side panels allow quick access if fan cleaning becomes necessary.
| Brand | Jonsbo |
|---|---|
| Type | Micro ATX / Mini-ITX |
| Color | Black |
| Case Material | Steel |
| Motherboard Compatibility | Micro ATX / Mini ITX |
| Dust Filters | Bottom |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 2 |
| Fan Options | Bottom - 1 x 120mm / Bottom - 1 x 140mm / Front - 1 x 120mm / Top - 1 x 120mm / Top - 1 x 140mm |
| Max GPU Length | 220-255mm |
| Max CPU Cooler Height | 75 mm |
| Max PSU Length | 185 mm |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
No fans are included with the case. It provides mounting points for one 120 mm or 140 mm fan at the bottom, one 120 mm fan at the front, and one 120 mm or 140 mm fan at the top, so you will need to purchase fans separately.
The case fits either one 3.5 inch hard drive or up to two 2.5 inch solid-state drives in the same mounting area. Choose the 3.5 inch bay for higher capacity mechanical storage, or the two 2.5 inch bays if you prefer faster SSDs and can work within their capacity limits.
Your graphics card must not exceed 255 mm in length. Measure the card you plan to use; if it is longer it will not fit, and if it is close to the limit you should verify cable clearance at the front of the case.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?