Jungle Leopard Prism6 MAX 120mm ARGB Case Fan Black 1-Pack
- 1 Fan
- Case Fan
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Jungle Leopard
120 mm PWM fan delivers 61.5 CFM at 1600 RPM with 30 dBA noise and three-sided ARGB mirror lighting
Color White Reverse-1Pack
The Jungle Leopard Prism6 PRO is a single 120mm case fan with ARGB lighting and an infinite mirror effect on three sides. It uses a hydraulic bearing and PWM control to vary speed between 765 and 1600 RPM. The white frame and reverse blade design suit builders who want coordinated lighting inside a standard chassis.
At the rated 1600 RPM the fan moves 61.5 CFM with a static pressure of 2 mmH2O while producing 30 dBA. The hydraulic bearing keeps friction low during typical case airflow duties. Power is supplied through a combined 3 or 4 pin connector that fits standard motherboard headers.
Under continuous load the PWM curve holds the fan at its 1600 RPM ceiling with a 10 percent tolerance. The bearing and blade geometry are designed to maintain consistent airflow without speed drift during extended operation. The ARGB LEDs remain synchronised through the 5V 3 pin header throughout the session.
| Brand | Jungle Leopard |
|---|---|
| Series | Prism6 PRO |
| Model | JL Prism6 PRO BK |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 1600RPM |
| Air Flow | 61.5CFM |
| Air Pressure | 2mmH2O |
| Noise Level | = 30dBA |
| Power Connector | 3 / 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Kiti šio modelio variantai
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
Mount the fan using the four included self-tapping screws into the 120 mm case or radiator holes. The step many miss is plugging the 3-pin 5 V ARGB header into the motherboard or a controller so the infinite mirror lighting works.
The hydraulic bearing is sealed and rated for long life, so no lubrication is required. If noise rises above the specified 30 dBA or airflow drops below 61.5 CFM after years of 1600 RPM operation, replace the entire fan.
At the maximum 1600 RPM ± 10 % the fan delivers 61.5 CFM at 2 mmH₂O static pressure. That pressure ceiling is the first limit when pushing air through dense radiator fins or restrictive filters.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?