Jungle Leopard Prism6 MAX 120mm ARGB Case Fan Black 1-Pack
- 1 Fan
- Case Fan
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
Jungle Leopard
120 mm PWM fan delivers 61.5 CFM at 1600 RPM with 30 dBA noise and three-sided ARGB mirror lighting
Color White Reverse-1Pack
The Jungle Leopard Prism6 PRO is a single 120mm case fan with ARGB lighting and an infinite mirror effect on three sides. It uses a hydraulic bearing and PWM control to vary speed between 765 and 1600 RPM. The white frame and reverse blade design suit builders who want coordinated lighting inside a standard chassis.
At the rated 1600 RPM the fan moves 61.5 CFM with a static pressure of 2 mmH2O while producing 30 dBA. The hydraulic bearing keeps friction low during typical case airflow duties. Power is supplied through a combined 3 or 4 pin connector that fits standard motherboard headers.
Under continuous load the PWM curve holds the fan at its 1600 RPM ceiling with a 10 percent tolerance. The bearing and blade geometry are designed to maintain consistent airflow without speed drift during extended operation. The ARGB LEDs remain synchronised through the 5V 3 pin header throughout the session.
| Brand | Jungle Leopard |
|---|---|
| Series | Prism6 PRO |
| Model | JL Prism6 PRO BK |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 1600RPM |
| Air Flow | 61.5CFM |
| Air Pressure | 2mmH2O |
| Noise Level | = 30dBA |
| Power Connector | 3 / 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Alte versiuni ale acestui model
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
Mount the fan using the four included self-tapping screws into the 120 mm case or radiator holes. The step many miss is plugging the 3-pin 5 V ARGB header into the motherboard or a controller so the infinite mirror lighting works.
The hydraulic bearing is sealed and rated for long life, so no lubrication is required. If noise rises above the specified 30 dBA or airflow drops below 61.5 CFM after years of 1600 RPM operation, replace the entire fan.
At the maximum 1600 RPM ± 10 % the fan delivers 61.5 CFM at 2 mmH₂O static pressure. That pressure ceiling is the first limit when pushing air through dense radiator fins or restrictive filters.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Nicio limbă nu corespunde.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?