Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 120mm square case fan with reverse blades and three-sided ARGB lens ring

Jungle Leopard

Jungle Leopard Prism6 PRO ARGB 120mm Reverse Blade Case Fan (Black)

SKU CH-T5MF-VEQ0R

A 120 mm reverse-blade case fan with ARGB infinite-mirror lighting, PWM control up to 1600 RPM, 61.5 CFM airflow and a hydraulic bearing rated at 30 dBA

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color Black Reverse-1Pack

  • Infinite mirror ARGB lighting creates depth from any angle
  • PWM control spins 765–1600 RPM for quiet or maximum airflow
  • 5 CFM airflow with 2 mmH₂O pressure cools cases and CPU coolers
  • Hydraulic bearing runs at 30 dBA for long-life silent operation
  • Includes 4 self-tapping screws for quick mounting on 120 mm fan slots

What the fan is and who it suits

The Jungle Leopard Prism6 PRO ARGB is a 120mm case fan built for standard chassis mounts. It targets builders who want addressable RGB lighting with a hydraulic bearing and PWM speed control in a single unit.

Capacity and headroom

At full load the fan spins at 1600RPM and moves 61.5CFM with 2mmH2O of static pressure. Rated speed ranges from 765 to 1600RPM, so airflow scales with thermal demand while noise stays at or below 30dBA.

Practical limits of the interface

Power and lighting run through a combined 3- and 4-pin connector that requires a motherboard 5V 3-pin ARGB header for colour control. The 25mm thickness fits typical 120mm mounting points, but thicker radiators or tight clearances may need verification.

Puncte forte

  • Infinite mirror ARGB lighting creates depth from any angle
  • PWM control spins 765–1600 RPM for quiet or maximum airflow
  • 5 CFM airflow with 2 mmH₂O pressure cools cases and CPU coolers
  • Hydraulic bearing runs at 30 dBA for long-life silent operation
  • Includes 4 self-tapping screws for quick mounting on 120 mm fan slots

Specificații

BrandJungle Leopard
SeriesPrism6 PRO
ModelJL Prism6 PRO BK
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM1600RPM
Air Flow61.5CFM
Air Pressure2mmH2O
Noise Level= 30dBA
Power Connector3 / 4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 120mm 25mm thick reverse-blade fan fit alongside my existing 120mm fans on the same radiator?

Yes, the 120×120×25mm dimensions match standard 120mm mounting holes, so it aligns with other 120mm fans on radiators or case grilles.

How can I confirm the ARGB lighting and PWM control are working after I connect the 3-pin 5V ARGB and 4-pin PWM headers?

The ARGB LEDs should illuminate through the infinite-mirror lens and the fan speed will scale between 765 and 1600 RPM under PWM control; verify both in your motherboard lighting software and fan-curve utility.

Does the single-fan pack include mounting screws or do I need to buy them separately?

Four self-tapping screws are included in the box for direct case or radiator mounting; no extra hardware is required.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.