Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
White 120mm ARGB case fan with infinite mirror lighting and reverse blades

Jungle Leopard

Jungle Leopard Prism6 PRO ARGB 120mm Case Fan White 1600RPM

SKU CH-9KGH-5QPPT

120 mm PWM fan delivers 61.5 CFM at 1600 RPM with 30 dBA noise and three-sided ARGB mirror lighting

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color White Reverse-1Pack

  • Infinite mirror ARGB lighting visible from any angle
  • 1600 RPM PWM speed with hydraulic bearing for quiet cooling
  • 5 CFM airflow at only 30 dBA noise
  • 120 mm fan fits standard case and CPU cooler mounts
  • Four included self-tapping screws make installation quick and clean

Single 120mm ARGB Case Fan

The Jungle Leopard Prism6 PRO is a single 120mm case fan with ARGB lighting and an infinite mirror effect on three sides. It uses a hydraulic bearing and PWM control to vary speed between 765 and 1600 RPM. The white frame and reverse blade design suit builders who want coordinated lighting inside a standard chassis.

Thermals Noise and Power Draw

At the rated 1600 RPM the fan moves 61.5 CFM with a static pressure of 2 mmH2O while producing 30 dBA. The hydraulic bearing keeps friction low during typical case airflow duties. Power is supplied through a combined 3 or 4 pin connector that fits standard motherboard headers.

Sustained Load Behaviour

Under continuous load the PWM curve holds the fan at its 1600 RPM ceiling with a 10 percent tolerance. The bearing and blade geometry are designed to maintain consistent airflow without speed drift during extended operation. The ARGB LEDs remain synchronised through the 5V 3 pin header throughout the session.

I korthet

  • Infinite mirror ARGB lighting visible from any angle
  • 1600 RPM PWM speed with hydraulic bearing for quiet cooling
  • 5 CFM airflow at only 30 dBA noise
  • 120 mm fan fits standard case and CPU cooler mounts
  • Four included self-tapping screws make installation quick and clean

Specifikationer

BrandJungle Leopard
SeriesPrism6 PRO
ModelJL Prism6 PRO BK
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM1600RPM
Air Flow61.5CFM
Air Pressure2mmH2O
Noise Level= 30dBA
Power Connector3 / 4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How do I install the Prism6 PRO 120 mm fan and what step is often missed?

Mount the fan using the four included self-tapping screws into the 120 mm case or radiator holes. The step many miss is plugging the 3-pin 5 V ARGB header into the motherboard or a controller so the infinite mirror lighting works.

What maintenance or replacement will the fan need later?

The hydraulic bearing is sealed and rated for long life, so no lubrication is required. If noise rises above the specified 30 dBA or airflow drops below 61.5 CFM after years of 1600 RPM operation, replace the entire fan.

What limit appears first during sustained full-speed use?

At the maximum 1600 RPM ± 10 % the fan delivers 61.5 CFM at 2 mmH₂O static pressure. That pressure ceiling is the first limit when pushing air through dense radiator fins or restrictive filters.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.