Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

Jungle Leopard

Jungle Leopard Prism6 MAX 120mm Reverse Blade ARGB Case Fan Black 1 Pack

SKU CH-M8XC-WCQGY

120mm reverse-blade case fan with three-sided infinite-mirror ARGB lighting, hydraulic bearing, 800-1850 RPM, 58.36 CFM airflow and 29 dBA noise

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing
  • Three-sided infinite mirror ARGB lighting creates depth with 0.5 mm layered geometry
  • Reverse blade design enables flexible intake or exhaust airflow configurations
  • 9 balanced blades deliver 58.36 CFM airflow at 2.07 mmH2O pressure
  • Hydraulic bearing and magnetic mounting reduce wear and vibration for quiet 29 dBA operation
  • Dual silicone shock pads absorb resonance noise when secured to the chassis

Product Identity

The Jungle Leopard Prism6 MAX is a 120mm ARGB case fan with a reverse-blade design and three-sided infinite mirror lighting. It targets builders who want coordinated airflow patterns and strong visual impact inside a standard chassis.

Installation Notes

The fan uses a hydraulic bearing and includes double-sided silicone pads to dampen vibration during mounting. A magnetic suction feature at the base helps alignment, but the ARGB connector is a 5V 3-pin header that requires a compatible motherboard or a separate controller box.

Interface Limits

PWM control runs between 800 and 1850 RPM with a noise ceiling of 29 dBA. The 5V ARGB header is mandatory for synchronised lighting; without it the fan spins but the mirror effect cannot be addressed by motherboard software.

I korthet

  • Three-sided infinite mirror ARGB lighting creates depth with 0.5 mm layered geometry
  • Reverse blade design enables flexible intake or exhaust airflow configurations
  • 9 balanced blades deliver 58.36 CFM airflow at 2.07 mmH2O pressure
  • Hydraulic bearing and magnetic mounting reduce wear and vibration for quiet 29 dBA operation
  • Dual silicone shock pads absorb resonance noise when secured to the chassis

Specifikationer

BrandJungle Leopard
SeriesPrism6 MAX
ModelJL Prism6 MAX BK
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM1850RPM
Air Flow58.36CFM
Air Pressure2.07mmH20
Noise Level=29DBA
Power Connector3 / 4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How do I confirm the Prism6 MAX 120mm fan is running at the rated 800-1850 RPM after installation?

Use BIOS or software monitoring to verify the PWM speed falls within the 800-1850 RPM range and listen for the 29 dBA noise level at full speed.

What comes with the single Prism6 MAX 120mm reverse-blade fan and what must I supply separately?

The pack includes one 120×120×25 mm fan with hydraulic bearing, double-sided shock pads and magnetic mounting; you must provide a motherboard 5 V 3-pin ARGB header or a separate controller for lighting sync.

Which Prism6 MAX version should I pick — black reverse blade, black forward blade, white reverse blade or white forward blade?

Choose the black reverse-blade model to exhaust air through a radiator or rear panel; match with forward-blade fans of either colour for balanced intake and exhaust airflow.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.