Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two tiny ESP32-C3 boards each with a .42-inch OLED screen, ceramic antenna and USB-C connector

KEHIPI

KEHIPI 2PCS ESP32-C3 .42-inch OLED Development Board

SKU CH-PAD4-2G754

Tiny ESP32-C3 board with .42-inch OLED, ceramic antenna and 11 GPIO for IoT wearables

  • Compact 0.42-inch OLED screen gives instant visual feedback
  • Built-in ceramic antenna enables reliable 2.4 GHz Wi-Fi and Bluetooth connectivity
  • 11 GPIO pins with PWM plus I2C, SPI, UART and ADC cover diverse sensor needs
  • Low-power design with multiple sleep modes extends battery life for portable projects
  • Two boards in one pack simplify scaling IoT, wearable or smart-home prototypes

Tiny OLED development board

The KEHIPI pack contains two ESP32-C3 super-mini boards each fitted with a 0.42-inch OLED display, a ceramic antenna and a USB-C connector for power and programming. The modules are based on the ESP32C3FN4/FH4 core with 4 MB flash and provide Wi-Fi and Bluetooth Low Energy connectivity for compact IoT designs.

Makers building wearable or battery-powered nodes

Developers who need a ready-to-use display and wireless stack in a very small footprint will benefit from the integrated screen and low-power modes. Projects that require more than eleven GPIO pins, additional hardware serial ports or a larger display area should consider a different form factor.

Eleven GPIO with PWM and four ADC channels

The board exposes eleven general-purpose pins that support PWM output and four analogue inputs alongside one I²C, one SPI and two UART interfaces, giving a fixed peripheral count that determines whether the board can drive the sensors and actuators your design requires.

Privalumai

  • Compact 0.42-inch OLED screen gives instant visual feedback
  • Built-in ceramic antenna enables reliable 2.4 GHz Wi-Fi and Bluetooth connectivity
  • 11 GPIO pins with PWM plus I2C, SPI, UART and ADC cover diverse sensor needs
  • Low-power design with multiple sleep modes extends battery life for portable projects
  • Two boards in one pack simplify scaling IoT, wearable or smart-home prototypes

Specifikacijos

BrandAITRIP

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.