Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two tiny ESP32-C3 boards each with a .42-inch OLED screen, ceramic antenna and USB-C connector

KEHIPI

KEHIPI 2PCS ESP32-C3 .42-inch OLED Development Board

SKU CH-PAD4-2G754

Tiny ESP32-C3 board with .42-inch OLED, ceramic antenna and 11 GPIO for IoT wearables

  • Compact 0.42-inch OLED screen gives instant visual feedback
  • Built-in ceramic antenna enables reliable 2.4 GHz Wi-Fi and Bluetooth connectivity
  • 11 GPIO pins with PWM plus I2C, SPI, UART and ADC cover diverse sensor needs
  • Low-power design with multiple sleep modes extends battery life for portable projects
  • Two boards in one pack simplify scaling IoT, wearable or smart-home prototypes

Tiny OLED development board

The KEHIPI pack contains two ESP32-C3 super-mini boards each fitted with a 0.42-inch OLED display, a ceramic antenna and a USB-C connector for power and programming. The modules are based on the ESP32C3FN4/FH4 core with 4 MB flash and provide Wi-Fi and Bluetooth Low Energy connectivity for compact IoT designs.

Makers building wearable or battery-powered nodes

Developers who need a ready-to-use display and wireless stack in a very small footprint will benefit from the integrated screen and low-power modes. Projects that require more than eleven GPIO pins, additional hardware serial ports or a larger display area should consider a different form factor.

Eleven GPIO with PWM and four ADC channels

The board exposes eleven general-purpose pins that support PWM output and four analogue inputs alongside one I²C, one SPI and two UART interfaces, giving a fixed peripheral count that determines whether the board can drive the sensors and actuators your design requires.

Helstu kostir

  • Compact 0.42-inch OLED screen gives instant visual feedback
  • Built-in ceramic antenna enables reliable 2.4 GHz Wi-Fi and Bluetooth connectivity
  • 11 GPIO pins with PWM plus I2C, SPI, UART and ADC cover diverse sensor needs
  • Low-power design with multiple sleep modes extends battery life for portable projects
  • Two boards in one pack simplify scaling IoT, wearable or smart-home prototypes

Tæknilýsing

BrandAITRIP

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.