Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two tiny ESP32-C3 boards each with a .42-inch OLED screen, ceramic antenna and USB-C connector

KEHIPI

KEHIPI 2PCS ESP32-C3 .42-inch OLED Development Board

SKU CH-PAD4-2G754

Tiny ESP32-C3 board with .42-inch OLED, ceramic antenna and 11 GPIO for IoT wearables

  • Compact 0.42-inch OLED screen gives instant visual feedback
  • Built-in ceramic antenna enables reliable 2.4 GHz Wi-Fi and Bluetooth connectivity
  • 11 GPIO pins with PWM plus I2C, SPI, UART and ADC cover diverse sensor needs
  • Low-power design with multiple sleep modes extends battery life for portable projects
  • Two boards in one pack simplify scaling IoT, wearable or smart-home prototypes

Tiny OLED development board

The KEHIPI pack contains two ESP32-C3 super-mini boards each fitted with a 0.42-inch OLED display, a ceramic antenna and a USB-C connector for power and programming. The modules are based on the ESP32C3FN4/FH4 core with 4 MB flash and provide Wi-Fi and Bluetooth Low Energy connectivity for compact IoT designs.

Makers building wearable or battery-powered nodes

Developers who need a ready-to-use display and wireless stack in a very small footprint will benefit from the integrated screen and low-power modes. Projects that require more than eleven GPIO pins, additional hardware serial ports or a larger display area should consider a different form factor.

Eleven GPIO with PWM and four ADC channels

The board exposes eleven general-purpose pins that support PWM output and four analogue inputs alongside one I²C, one SPI and two UART interfaces, giving a fixed peripheral count that determines whether the board can drive the sensors and actuators your design requires.

Puncte forte

  • Compact 0.42-inch OLED screen gives instant visual feedback
  • Built-in ceramic antenna enables reliable 2.4 GHz Wi-Fi and Bluetooth connectivity
  • 11 GPIO pins with PWM plus I2C, SPI, UART and ADC cover diverse sensor needs
  • Low-power design with multiple sleep modes extends battery life for portable projects
  • Two boards in one pack simplify scaling IoT, wearable or smart-home prototypes

Specificații

BrandAITRIP

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.