Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Grey PLA filament spool 1.75mm diameter 1kg weight +/- .03mm accuracy

LONGER

LONGER PLA Filament 1.75mm Grey 1kg +/- .03mm 3d printers accessory

SKU CH-JPWA-KTQJE

1.75 mm PLA filament on a 1 kg spool with ±.03 mm accuracy, tangle-free winding and 190–220 °C print temperature

  • ColorGrey

Color Grey

  • Precise prints with ±.03 mm dimensional accuracy
  • Strong, low-shrink parts from high-purity PLA
  • Ready to print at 190–220 °C extrusion range
  • 100 % tangle-free spool wound and inspected
  • Eco-friendly, non-toxic filament safe for indoor use

Grey PLA filament for FDM printers

This 1.75mm PLA spool weighs 1kg and suits makers who need reliable material for everyday FDM printing. The grey colour works well for functional parts and visual prototypes alike.

Simple loading with tangle-free winding

Mechanical winding and manual checks keep the filament free of knots when the pack is opened. Feeding the free end into the spool holes after each session prevents tangles on the next print.

Consistent flow during long prints

Dimensional accuracy of +/- .03mm and low shrinkage maintain steady extrusion from 190 to 220 celsius. High purity and toughness reduce the risk of snaps or jams on extended jobs.

Privalumai

  • Precise prints with ±.03 mm dimensional accuracy
  • Strong, low-shrink parts from high-purity PLA
  • Ready to print at 190–220 °C extrusion range
  • 100 % tangle-free spool wound and inspected
  • Eco-friendly, non-toxic filament safe for indoor use

Specifikacijos

ColorGrey

Kiti šio modelio variantai

Dar 1 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How do I confirm the filament is extruding correctly after loading it?

Set the hot-end between 190 and 220 °C; consistent flow and layer adhesion show the +/- 0.03 mm tolerance is holding.

What comes with the spool and what must I supply?

The box contains a 1 kg grey PLA spool wound tangle-free; you provide the FDM printer and any bed-adhesion aids.

Which diameter should I choose for my printer?

Select the 1.75 mm version — it matches almost every FDM printer that uses 1.75 mm filament.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.