Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Grey PLA filament spool 1.75mm diameter 1kg weight +/- .03mm accuracy

LONGER

LONGER PLA Filament 1.75mm Grey 1kg +/- .03mm 3d printers accessory

SKU CH-JPWA-KTQJE

1.75 mm PLA filament on a 1 kg spool with ±.03 mm accuracy, tangle-free winding and 190–220 °C print temperature

  • ColorGrey

Color Grey

  • Precise prints with ±.03 mm dimensional accuracy
  • Strong, low-shrink parts from high-purity PLA
  • Ready to print at 190–220 °C extrusion range
  • 100 % tangle-free spool wound and inspected
  • Eco-friendly, non-toxic filament safe for indoor use

Grey PLA filament for FDM printers

This 1.75mm PLA spool weighs 1kg and suits makers who need reliable material for everyday FDM printing. The grey colour works well for functional parts and visual prototypes alike.

Simple loading with tangle-free winding

Mechanical winding and manual checks keep the filament free of knots when the pack is opened. Feeding the free end into the spool holes after each session prevents tangles on the next print.

Consistent flow during long prints

Dimensional accuracy of +/- .03mm and low shrinkage maintain steady extrusion from 190 to 220 celsius. High purity and toughness reduce the risk of snaps or jams on extended jobs.

Pluspunten

  • Precise prints with ±.03 mm dimensional accuracy
  • Strong, low-shrink parts from high-purity PLA
  • Ready to print at 190–220 °C extrusion range
  • 100 % tangle-free spool wound and inspected
  • Eco-friendly, non-toxic filament safe for indoor use

Specificaties

ColorGrey

Andere versies van dit model

Nog 1 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I confirm the filament is extruding correctly after loading it?

Set the hot-end between 190 and 220 °C; consistent flow and layer adhesion show the +/- 0.03 mm tolerance is holding.

What comes with the spool and what must I supply?

The box contains a 1 kg grey PLA spool wound tangle-free; you provide the FDM printer and any bed-adhesion aids.

Which diameter should I choose for my printer?

Select the 1.75 mm version — it matches almost every FDM printer that uses 1.75 mm filament.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.