Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
A green PCB breakout board with a 64-pin connector and twelve 6-pin cables each 50cm long

myVolts

myVolts DPS-1200FB Breakout Board 64Pin to 12x 6Pin 50cm Cables

SKU CH-5CQ0-7Q1ZC

Breakout board converts a 64-pin server PSU into twelve 6-pin GPU connectors with 50 cm 18 AWG cables

  • TypeAT
  • Converts 64-pin server PSU to 12× 6-pin GPU power connectors
  • Solid-capacitor filtering on every output for clean 12 V delivery
  • Multilayer PCB handles up to 1600 W without overheating
  • Includes twelve 18 AWG 6-pin to 8-pin (6+2) cables each 50 cm long
  • LED voltage display plus synchronous on/off switch mirrors main PSU state

Breakout Board for Common Slot PSUs

This breakout board converts a 64-pin Common Slot server power supply into twelve 6-pin outputs for GPU power. It supports models such as the DPS-1200FB, DPS-800GB, DPS-750RB and several other HP-compatible units. An onboard LED shows the working voltage in real time. A synchronous switch lets the board power on and off with the main system.

Replaces Custom Wiring Harnesses

The adapter replaces hand-soldered or improvised breakout cables when moving a high-wattage server PSU into a mining or compute rig. It is rated for up to 1600 W through solid-capacitor filtering and a multi-layer PCB that stays cool under load. The jump is worth it when you need twelve reliable 6-pin feeds without building a harness yourself.

Suits Builders Using Supported Server PSUs

This board suits builders who already own a listed Common Slot supply and want plug-and-play GPU power. It is not for users with standard ATX power supplies, nor for anyone needing 8-pin or 12VHPWR connectors directly from the board. The included cables are 6-pin to 8-pin (6+2) only.

Privalumai

  • Converts 64-pin server PSU to 12× 6-pin GPU power connectors
  • Solid-capacitor filtering on every output for clean 12 V delivery
  • Multilayer PCB handles up to 1600 W without overheating
  • Includes twelve 18 AWG 6-pin to 8-pin (6+2) cables each 50 cm long
  • LED voltage display plus synchronous on/off switch mirrors main PSU state

Specifikacijos

TypeAT

Klausimai apie šią prekę

What clearance does the 64-pin breakout board need to sit on a DPS-1200FB unit?

The board plugs directly into the 64-pin common-slot connector on the supply; allow enough depth for the board plus the 50 cm cables that run from its twelve 6-pin ports.

Which step do installers most often reverse when connecting the 6-pin to 8-pin (6+2) cables?

Insert each cable into the board’s 6-pin socket first, holding the socket steady, then plug the 8-pin end into the graphics card — reversing this order can bend or break the socket pins.

When should the solid-capacitor filter board or the 18 AWG cables be inspected or swapped?

Check the cables and board visually every few months; replace any cable showing melted insulation, discoloured pins or cracked sleeving, and swap the board if capacitors bulge or the LED voltage display fails.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.