Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
A green PCB breakout board with a 64-pin connector and twelve 6-pin cables each 50cm long

myVolts

myVolts DPS-1200FB Breakout Board 64Pin to 12x 6Pin 50cm Cables

SKU CH-5CQ0-7Q1ZC

Breakout board converts a 64-pin server PSU into twelve 6-pin GPU connectors with 50 cm 18 AWG cables

  • TypeAT
  • Converts 64-pin server PSU to 12× 6-pin GPU power connectors
  • Solid-capacitor filtering on every output for clean 12 V delivery
  • Multilayer PCB handles up to 1600 W without overheating
  • Includes twelve 18 AWG 6-pin to 8-pin (6+2) cables each 50 cm long
  • LED voltage display plus synchronous on/off switch mirrors main PSU state

Breakout Board for Common Slot PSUs

This breakout board converts a 64-pin Common Slot server power supply into twelve 6-pin outputs for GPU power. It supports models such as the DPS-1200FB, DPS-800GB, DPS-750RB and several other HP-compatible units. An onboard LED shows the working voltage in real time. A synchronous switch lets the board power on and off with the main system.

Replaces Custom Wiring Harnesses

The adapter replaces hand-soldered or improvised breakout cables when moving a high-wattage server PSU into a mining or compute rig. It is rated for up to 1600 W through solid-capacitor filtering and a multi-layer PCB that stays cool under load. The jump is worth it when you need twelve reliable 6-pin feeds without building a harness yourself.

Suits Builders Using Supported Server PSUs

This board suits builders who already own a listed Common Slot supply and want plug-and-play GPU power. It is not for users with standard ATX power supplies, nor for anyone needing 8-pin or 12VHPWR connectors directly from the board. The included cables are 6-pin to 8-pin (6+2) only.

Punti di forza

  • Converts 64-pin server PSU to 12× 6-pin GPU power connectors
  • Solid-capacitor filtering on every output for clean 12 V delivery
  • Multilayer PCB handles up to 1600 W without overheating
  • Includes twelve 18 AWG 6-pin to 8-pin (6+2) cables each 50 cm long
  • LED voltage display plus synchronous on/off switch mirrors main PSU state

Caratteristiche tecniche

TypeAT

Domande su questo articolo

What clearance does the 64-pin breakout board need to sit on a DPS-1200FB unit?

The board plugs directly into the 64-pin common-slot connector on the supply; allow enough depth for the board plus the 50 cm cables that run from its twelve 6-pin ports.

Which step do installers most often reverse when connecting the 6-pin to 8-pin (6+2) cables?

Insert each cable into the board’s 6-pin socket first, holding the socket steady, then plug the 8-pin end into the graphics card — reversing this order can bend or break the socket pins.

When should the solid-capacitor filter board or the 18 AWG cables be inspected or swapped?

Check the cables and board visually every few months; replace any cable showing melted insulation, discoloured pins or cracked sleeving, and swap the board if capacitors bulge or the LED voltage display fails.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.