Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
A green PCB breakout board with a 64-pin connector and twelve 6-pin cables each 50cm long

myVolts

myVolts DPS-1200FB Breakout Board 64Pin to 12x 6Pin 50cm Cables

SKU CH-5CQ0-7Q1ZC

Breakout board converts a 64-pin server PSU into twelve 6-pin GPU connectors with 50 cm 18 AWG cables

  • TypeAT
  • Converts 64-pin server PSU to 12× 6-pin GPU power connectors
  • Solid-capacitor filtering on every output for clean 12 V delivery
  • Multilayer PCB handles up to 1600 W without overheating
  • Includes twelve 18 AWG 6-pin to 8-pin (6+2) cables each 50 cm long
  • LED voltage display plus synchronous on/off switch mirrors main PSU state

Breakout Board for Common Slot PSUs

This breakout board converts a 64-pin Common Slot server power supply into twelve 6-pin outputs for GPU power. It supports models such as the DPS-1200FB, DPS-800GB, DPS-750RB and several other HP-compatible units. An onboard LED shows the working voltage in real time. A synchronous switch lets the board power on and off with the main system.

Replaces Custom Wiring Harnesses

The adapter replaces hand-soldered or improvised breakout cables when moving a high-wattage server PSU into a mining or compute rig. It is rated for up to 1600 W through solid-capacitor filtering and a multi-layer PCB that stays cool under load. The jump is worth it when you need twelve reliable 6-pin feeds without building a harness yourself.

Suits Builders Using Supported Server PSUs

This board suits builders who already own a listed Common Slot supply and want plug-and-play GPU power. It is not for users with standard ATX power supplies, nor for anyone needing 8-pin or 12VHPWR connectors directly from the board. The included cables are 6-pin to 8-pin (6+2) only.

Najważniejsze cechy

  • Converts 64-pin server PSU to 12× 6-pin GPU power connectors
  • Solid-capacitor filtering on every output for clean 12 V delivery
  • Multilayer PCB handles up to 1600 W without overheating
  • Includes twelve 18 AWG 6-pin to 8-pin (6+2) cables each 50 cm long
  • LED voltage display plus synchronous on/off switch mirrors main PSU state

Specyfikacja

TypeAT

Pytania dotyczące tego produktu

What clearance does the 64-pin breakout board need to sit on a DPS-1200FB unit?

The board plugs directly into the 64-pin common-slot connector on the supply; allow enough depth for the board plus the 50 cm cables that run from its twelve 6-pin ports.

Which step do installers most often reverse when connecting the 6-pin to 8-pin (6+2) cables?

Insert each cable into the board’s 6-pin socket first, holding the socket steady, then plug the 8-pin end into the graphics card — reversing this order can bend or break the socket pins.

When should the solid-capacitor filter board or the 18 AWG cables be inspected or swapped?

Check the cables and board visually every few months; replace any cable showing melted insulation, discoloured pins or cracked sleeving, and swap the board if capacitors bulge or the LED voltage display fails.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.