Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Compact rectangular ABS power supply unit with DIN rail mounting and terminal connections

myVolts

myVolts MDR-60-12 12V 5A 60W power supply

SKU CH-7573-76X5C MPN MDR-60-12

A compact 60 W industrial power supply delivering 12 V at 5 A with overload and over-voltage protection

  • TypeAT
  • 12 V 5 A output delivers 60 W for industrial loads
  • 85 % efficiency reduces heat and running cost
  • 100-240 VAC input works worldwide without a selector
  • 40 x 90 x 100 mm DIN-rail form factor fits standard enclosures
  • Overload and over-voltage protection guards connected equipment

Compact DIN-rail power supply

The myVolts MDR-60-12 is a new switched-mode power supply built into an ultra-thin ABS shell for industrial DIN-rail mounting. It delivers a steady 12 V output at up to 5 A for a total of 60 W, making it suitable for control panels, automation equipment and similar low-voltage DC loads. The unit accepts a universal 100-240 VAC input and measures approximately 40 x 90 x 100 mm.

12 V 5 A output rating

The single specification that decides fit is the 12 V, 5 A rated output, providing a maximum of 60 W continuous power. The current range spans 0-5 A, so any connected load must stay within that envelope; devices requiring higher voltage, higher current or a different voltage rail cannot use this unit.

85 % efficiency with protection

Operating at 85 % efficiency, the supply runs cool enough for the compact ABS enclosure without active cooling. Built-in overload and over-voltage protection shut down the output if the load exceeds 5 A or if voltage spikes occur, limiting heat rise and acoustic noise to a minimum during normal operation.

Privalumai

  • 12 V 5 A output delivers 60 W for industrial loads
  • 85 % efficiency reduces heat and running cost
  • 100-240 VAC input works worldwide without a selector
  • 40 x 90 x 100 mm DIN-rail form factor fits standard enclosures
  • Overload and over-voltage protection guards connected equipment

Specifikacijos

TypeAT

Klausimai apie šią prekę

What does the 60 W rating mean when the unit is installed in a system?

It can deliver up to 60 W of continuous power at 12 V and 5 A, with an efficiency of 85 %, so the connected load receives a stable 12 V supply within that limit.

What input standard does the supply use and what does it cap in practice?

It accepts 100-240 V AC at 1.8 A, so it works on any mains voltage in that range and the input current will not exceed 1.8 A.

What physical space and mounting does the 40 x 90 x 100 mm unit need?

The ultra-thin rail design measures 40 mm wide, 90 mm high and 100 mm deep, fitting a standard DIN rail slot and secured by its ABS shell.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.