Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact rectangular ABS power supply unit with DIN rail mounting and terminal connections

myVolts

myVolts MDR-60-12 12V 5A 60W power supply

SKU CH-7573-76X5C MPN MDR-60-12

A compact 60 W industrial power supply delivering 12 V at 5 A with overload and over-voltage protection

  • TypeAT
  • 12 V 5 A output delivers 60 W for industrial loads
  • 85 % efficiency reduces heat and running cost
  • 100-240 VAC input works worldwide without a selector
  • 40 x 90 x 100 mm DIN-rail form factor fits standard enclosures
  • Overload and over-voltage protection guards connected equipment

Compact DIN-rail power supply

The myVolts MDR-60-12 is a new switched-mode power supply built into an ultra-thin ABS shell for industrial DIN-rail mounting. It delivers a steady 12 V output at up to 5 A for a total of 60 W, making it suitable for control panels, automation equipment and similar low-voltage DC loads. The unit accepts a universal 100-240 VAC input and measures approximately 40 x 90 x 100 mm.

12 V 5 A output rating

The single specification that decides fit is the 12 V, 5 A rated output, providing a maximum of 60 W continuous power. The current range spans 0-5 A, so any connected load must stay within that envelope; devices requiring higher voltage, higher current or a different voltage rail cannot use this unit.

85 % efficiency with protection

Operating at 85 % efficiency, the supply runs cool enough for the compact ABS enclosure without active cooling. Built-in overload and over-voltage protection shut down the output if the load exceeds 5 A or if voltage spikes occur, limiting heat rise and acoustic noise to a minimum during normal operation.

Kohokohdat

  • 12 V 5 A output delivers 60 W for industrial loads
  • 85 % efficiency reduces heat and running cost
  • 100-240 VAC input works worldwide without a selector
  • 40 x 90 x 100 mm DIN-rail form factor fits standard enclosures
  • Overload and over-voltage protection guards connected equipment

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

What does the 60 W rating mean when the unit is installed in a system?

It can deliver up to 60 W of continuous power at 12 V and 5 A, with an efficiency of 85 %, so the connected load receives a stable 12 V supply within that limit.

What input standard does the supply use and what does it cap in practice?

It accepts 100-240 V AC at 1.8 A, so it works on any mains voltage in that range and the input current will not exceed 1.8 A.

What physical space and mounting does the 40 x 90 x 100 mm unit need?

The ultra-thin rail design measures 40 mm wide, 90 mm high and 100 mm deep, fitting a standard DIN rail slot and secured by its ABS shell.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.