Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Compact rectangular ABS power supply unit with DIN rail mounting and terminal connections

myVolts

myVolts MDR-60-12 12V 5A 60W power supply

SKU CH-7573-76X5C MPN MDR-60-12

A compact 60 W industrial power supply delivering 12 V at 5 A with overload and over-voltage protection

  • TypeAT
  • 12 V 5 A output delivers 60 W for industrial loads
  • 85 % efficiency reduces heat and running cost
  • 100-240 VAC input works worldwide without a selector
  • 40 x 90 x 100 mm DIN-rail form factor fits standard enclosures
  • Overload and over-voltage protection guards connected equipment

Compact DIN-rail power supply

The myVolts MDR-60-12 is a new switched-mode power supply built into an ultra-thin ABS shell for industrial DIN-rail mounting. It delivers a steady 12 V output at up to 5 A for a total of 60 W, making it suitable for control panels, automation equipment and similar low-voltage DC loads. The unit accepts a universal 100-240 VAC input and measures approximately 40 x 90 x 100 mm.

12 V 5 A output rating

The single specification that decides fit is the 12 V, 5 A rated output, providing a maximum of 60 W continuous power. The current range spans 0-5 A, so any connected load must stay within that envelope; devices requiring higher voltage, higher current or a different voltage rail cannot use this unit.

85 % efficiency with protection

Operating at 85 % efficiency, the supply runs cool enough for the compact ABS enclosure without active cooling. Built-in overload and over-voltage protection shut down the output if the load exceeds 5 A or if voltage spikes occur, limiting heat rise and acoustic noise to a minimum during normal operation.

Poudarki

  • 12 V 5 A output delivers 60 W for industrial loads
  • 85 % efficiency reduces heat and running cost
  • 100-240 VAC input works worldwide without a selector
  • 40 x 90 x 100 mm DIN-rail form factor fits standard enclosures
  • Overload and over-voltage protection guards connected equipment

Specifikacije

TypeAT

Vprašanja o tem izdelku

What does the 60 W rating mean when the unit is installed in a system?

It can deliver up to 60 W of continuous power at 12 V and 5 A, with an efficiency of 85 %, so the connected load receives a stable 12 V supply within that limit.

What input standard does the supply use and what does it cap in practice?

It accepts 100-240 V AC at 1.8 A, so it works on any mains voltage in that range and the input current will not exceed 1.8 A.

What physical space and mounting does the 40 x 90 x 100 mm unit need?

The ultra-thin rail design measures 40 mm wide, 90 mm high and 100 mm deep, fitting a standard DIN rail slot and secured by its ABS shell.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.