Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two green 204-pin DDR3 SODIMM modules side by side

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX XT-4015 JIVA memory upgrade

SKU CH-M8JY-423XZ

16 GB DDR3 kit with two 8 GB SODIMM modules at 1333 MHz for POSIFLEX XT-4015 JIVA terminals

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX XT-4015 JIVA POS terminals
  • 16GB dual-channel kit boosts multitasking headroom
  • DDR3 1333 PC3-10600 CL9 matches system spec
  • Low-voltage 1.35V operation reduces power draw
  • 204-pin SODIMM form factor fits the slot

POSIFLEX XT-4015 JIVA memory kit

This 16 GB DDR3 SODIMM kit is built for the POSIFLEX XT-4015 JIVA point-of-sale terminal. It contains two 8 GB modules rated at 1333 MHz with CL9 latency. The unbuffered, non-ECC design matches the original system specification.

Upgrade from lower-capacity DDR3 SODIMMs

Replacing 4 GB or 8 GB factory modules with this 16 GB kit removes memory bottlenecks in multi-application POS workloads. The jump is worthwhile when the terminal runs inventory, payment and reporting software simultaneously and the original memory is fully utilised.

Tool-free SODIMM installation

The 204-pin modules slot into the terminal's memory compartment without screws or cables. The only common issue is seating both modules firmly until the retention clips click; a loose module will prevent the system from posting.

Privalumai

  • Designed for POSIFLEX XT-4015 JIVA POS terminals
  • 16GB dual-channel kit boosts multitasking headroom
  • DDR3 1333 PC3-10600 CL9 matches system spec
  • Low-voltage 1.35V operation reduces power draw
  • 204-pin SODIMM form factor fits the slot

Specifikacijos

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Klausimai apie šią prekę

Does the 204-pin SODIMM form factor fit the POSIFLEX XT-4015 JIVA terminal?

Yes, the kit uses the 204-pin DDR3 SODIMM form factor specified for the POSIFLEX XT-4015 JIVA system.

What is the correct slot order when installing the two 8GB modules?

Install one module in each available SODIMM slot; the terminal typically uses dual-channel architecture so both slots should be populated.

Will the modules need a firmware update or battery replacement over time?

No, DDR3 SODIMM memory has no firmware or battery; it requires no maintenance beyond keeping the contacts clean.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.