BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00278838BTC
Stokta
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX XT-4015 JIVA memory upgrade
16 GB DDR3 kit with two 8 GB SODIMM modules at 1333 MHz for POSIFLEX XT-4015 JIVA terminals
- Capacity16GB (2 x 8GB)
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX XT-4015 JIVA POS terminals
- 16GB dual-channel kit boosts multitasking headroom
- DDR3 1333 PC3-10600 CL9 matches system spec
- Low-voltage 1.35V operation reduces power draw
- 204-pin SODIMM form factor fits the slot
POSIFLEX XT-4015 JIVA memory kit
This 16 GB DDR3 SODIMM kit is built for the POSIFLEX XT-4015 JIVA point-of-sale terminal. It contains two 8 GB modules rated at 1333 MHz with CL9 latency. The unbuffered, non-ECC design matches the original system specification.
Upgrade from lower-capacity DDR3 SODIMMs
Replacing 4 GB or 8 GB factory modules with this 16 GB kit removes memory bottlenecks in multi-application POS workloads. The jump is worthwhile when the terminal runs inventory, payment and reporting software simultaneously and the original memory is fully utilised.
Tool-free SODIMM installation
The 204-pin modules slot into the terminal's memory compartment without screws or cables. The only common issue is seating both modules firmly until the retention clips click; a loose module will prevent the system from posting.
Öne çıkanlar
- Designed for POSIFLEX XT-4015 JIVA POS terminals
- 16GB dual-channel kit boosts multitasking headroom
- DDR3 1333 PC3-10600 CL9 matches system spec
- Low-voltage 1.35V operation reduces power draw
- 204-pin SODIMM form factor fits the slot
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
Bu ürünle ilgili sorular
Does the 204-pin SODIMM form factor fit the POSIFLEX XT-4015 JIVA terminal?
Yes, the kit uses the 204-pin DDR3 SODIMM form factor specified for the POSIFLEX XT-4015 JIVA system.
What is the correct slot order when installing the two 8GB modules?
Install one module in each available SODIMM slot; the terminal typically uses dual-channel architecture so both slots should be populated.
Will the modules need a firmware update or battery replacement over time?
No, DDR3 SODIMM memory has no firmware or battery; it requires no maintenance beyond keeping the contacts clean.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
