Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green 204-pin DDR3 SODIMM modules side by side

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX XT-4015 JIVA memory upgrade

SKU CH-M8JY-423XZ

16 GB DDR3 kit with two 8 GB SODIMM modules at 1333 MHz for POSIFLEX XT-4015 JIVA terminals

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX XT-4015 JIVA POS terminals
  • 16GB dual-channel kit boosts multitasking headroom
  • DDR3 1333 PC3-10600 CL9 matches system spec
  • Low-voltage 1.35V operation reduces power draw
  • 204-pin SODIMM form factor fits the slot

POSIFLEX XT-4015 JIVA memory kit

This 16 GB DDR3 SODIMM kit is built for the POSIFLEX XT-4015 JIVA point-of-sale terminal. It contains two 8 GB modules rated at 1333 MHz with CL9 latency. The unbuffered, non-ECC design matches the original system specification.

Upgrade from lower-capacity DDR3 SODIMMs

Replacing 4 GB or 8 GB factory modules with this 16 GB kit removes memory bottlenecks in multi-application POS workloads. The jump is worthwhile when the terminal runs inventory, payment and reporting software simultaneously and the original memory is fully utilised.

Tool-free SODIMM installation

The 204-pin modules slot into the terminal's memory compartment without screws or cables. The only common issue is seating both modules firmly until the retention clips click; a loose module will prevent the system from posting.

Helstu kostir

  • Designed for POSIFLEX XT-4015 JIVA POS terminals
  • 16GB dual-channel kit boosts multitasking headroom
  • DDR3 1333 PC3-10600 CL9 matches system spec
  • Low-voltage 1.35V operation reduces power draw
  • 204-pin SODIMM form factor fits the slot

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Spurningar um þessa vöru

Does the 204-pin SODIMM form factor fit the POSIFLEX XT-4015 JIVA terminal?

Yes, the kit uses the 204-pin DDR3 SODIMM form factor specified for the POSIFLEX XT-4015 JIVA system.

What is the correct slot order when installing the two 8GB modules?

Install one module in each available SODIMM slot; the terminal typically uses dual-channel architecture so both slots should be populated.

Will the modules need a firmware update or battery replacement over time?

No, DDR3 SODIMM memory has no firmware or battery; it requires no maintenance beyond keeping the contacts clean.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.